Abstract:Herein, a novel in-plane dual-axis micro-electro-mechanical system piezoresistive accelerometer was proposed based on theoretical and simulation analyses. Its self-support piezoresistive beam (SPB) possessed the features of force amplification and axial deformation to obtain high sensitivity. To clarify the influence of structural dimensions on the performance of the accelerometer and the pure axial-deformation condition of the SPB, a theoretical model was established to analyze mechanical behavior. The theoretical results were in well accordance with the simulation ones, displaying a maximum relative error of less than 10%. The theoretical and simulation results suggested that the accelerometer with thin and long support/hinge beams possesses a higher sensitivity but a lower frequency. However, the sensitivity and natural frequency increased simultaneously before the distance between SPB and support beam $D$ reached a certain value. The simulated longitudinal stress of SPB achieved the average value of 32.473 MPa, and the first-order natural frequency was nearly 13.6 kHz. Furthermore, the fabricated accelerometer was tested in a simple packaging case. The experimental results demonstrated that the proposed accelerometer had a measuring sensitivity of 0.198 mV/g/V with a maximum non-linearity of 1.00% FS and a resonant frequency of 12.93 kHz. The cross sensitivities were 11.93 and $15.97~\mu \text{V}$ /g/5V in the $y$ and $z$ axes, respectively, which were 1.21% and 1.61% of the prime-axis sensitivity. The zero offset with varying temperatures was 0.00296%/°C, and the zero drift in the long-term static stability test was 0.02 mV. All the results above revealed the promising application potential of the proposed accelerometer in vibration detection in the high-speed rotating spindle of machine tools. [2022-0057]

Analysis of Four-Beam Piezoelectric Accelerometer Based on ANSYS

Design and Simulation of Four-Beam Piezoelectric Accelerometer with Slot Substrate

Static Analysis of Thin Film Piezoelectric Micro-Accelerometer Using Analytical and Finite Element Modeling

Analysis of Thin Film Piezoelectric Microaccelerometer Using Analytical and Finite Element Modeling

Analytical Mathematical Model of Piezoelectric 6-D Accelerometer About Amplitude-Frequency Characteristics

Design and Simulation for Tri-Axial Piezoresistive Mems Accelerometer

Analytical and finite element analysis of a new tri-axial piezoelectric accelerometer

Modeling and Simulation of A Silicon Integration Tri-Axial Piezoresistive MEMS Accelerometer Chip Used for High Impact Test

Analysis of Transverse Sensitivity in Eight-beam Piezoresistive Micro-accelerometer

Analysis and Design of a Novel Piezoresistive Accelerometer with Axially Stressed Self-Supporting Sensing Beams

Design and Simulation of Capacitive, Piezoresistive and Piezoelectric Triaxial Accelerometers Using a Highly Symmetrical Quad-Beam Structure

Analysis On Twin-Mass Structure For A Piezoresistive Accelerometer

Dynamic Characteristics Analysis of Piezoelectric Six-Degree-of-Freedom Accelerometer 1

Analytical modeling of piezoelectric 6-degree-of-freedom accelerometer about cross-coupling degree

Multiparameter Modeling of Piezoelectric Six-Degree-of-Freedom Accelerometer about Sensitivity Characteristics

A Novel Tri-Axial Piezoelectric MEMS Accelerometer with Folded Beams

Modeling and Characterization of a Novel In-Plane Dual-Axis MEMS Accelerometer Based on Self-Support Piezoresistive Beam

A Mathematical Model Of A Piezo-Resistive Eight-Beam Three-Axis Accelerometer With Simulation And Experimental Validation

Design of a Beam-Membrane Piezoresistive Accelerometer Based on MEMS Technology

A Two-Axis MEMS Piezoresistive In-Plane Accelerometer with Pure Axially Deformed Microbeams

Analysis and Design for Piezoresistive Accelerometer Geometry Considering Sensitivity, Resonant Frequency and Cross-Axis Sensitivity