Abstract:GaN/InGaN light emitting diodes(LEDs)grown on sapphire substrates have current transport along the lateral direction.This often results in non-uniform current spreading,which leads to the non-uni-formity of luminescence and the reduction of lifetime.Therefore,proper mesa structure should be designed to improve current spreading.The characteristics of the GaN/InGaN LED have been examined from the view point of uniform current spreading and low series resistance.A steady-state current field model is employed to describe the current spreading of GaN based LED.Finite element method is used to simulate the current distribution of different types of LEDs in three dimensions.The series resistance of the LED is derived from the calculated current spreading.Standards to quantitatively evaluate the uniformity of current spreading are presented.By quantitatively comparing the series resistance and current spreading of LEDs with different mesa structures,we find that that the LED with the interdigitated mesa structure has the lowest series resistance under the process conditions of our lab.Parameters of the interdigitated mesa structure are further optimized based on our model to achieve the smallest series resistance.Two types of LEDs,denoted as Sample A and Sample B,are prepared with a chip size of 1 mm×1 mm.Sample A is fabricated using the optimized interdigitated electrode pattern as described above,while Sample B is fabricated using a ring electrode pattern without optimization for comparison.By measuring the I-V curve,the values of series resistance of the three samples are derived,which are 1.6 Ω and 3.6 Ω for Sample A and Sample B,respectively.The resistance of the former one is only 44.4% of the latter one,which is consistent with the calculated results based on our model.The reduction in resistance will lead to the improvement of the efficiency of LEDs.

Thermal Dispersion of GaN-based Power LEDs

Analysis of thermal spreading resistance in high power LED package and its design optimization

Theoretical considerations on efficiency degradation due to thermal effect in a planar GaN-based LED with a GaN substrate

Thermal design and analysis of power LED packaging based on graphene

High-output power GaN-LED based on surface plasmon enhancement

Thermal Design of GaN-based High-power LED Module

Effects of Junction Temperature and Its Variations on the Performance of GaN‐based High Power Flip‐chip LEDs

Power-Dependent Optical Characterization of the InGaN/GaN-Based Micro-Light-Emitting-Diode (LED) in High Spatial Resolution

Analysis of Junction Temperatures in High-Power GaN-based LEDs

Thermal Analysis of High Power GaN-based Light Emitting Diode

Thermal Management Design from Chip to Package for High Power InGaN/Sapphire LED Applications

Enhanced Heat Dissipation in Gallium Nitride-Based Light-Emitting Diodes by Piezo-phototronic Effect

High-Efficiency, Microscale Gan Light-Emitting Diodes and Their Thermal Properties on Unusual Substrates

Study on 3D Thermal Transport in Micro-Leds on GaN Substrate at the Level of Kw/cm2

Finite Element Model of GaN Based LED and the Optimization of the Mesa Structure

Enhanced Light Extraction from a GaN-based Green Light-Emitting Diode with Hemicylindrical Linear Grating Structure.

Study of GaN-Based Light-Emitting Diode (LED) With a Hybrid Surface Structure

Research on the Current-voltage Characteristics of GaN-based High Power Flip-chip Blue LED

Study on Light Extraction Efficiency of GaN-based Light-emitting Diode Chips

Thermal Analysis of Flip-Chip Bonding Designs for GaN Power HEMTs with an On-Chip Heat-Spreading Layer

Improving the External Quantum Efficiency of High-Power GaN-Based Flip-Chip LEDs by Using Sidewall Composite Reflective Micro Structure