Abstract:Light emission from semiconductors depends not only on the efficiency of carrier injection and recombination but also extraction efficiency. For ultraviolet emission from high band gap materials such as ZnO, nanowires have higher extraction efficiencies than thin films, but conventional approaches for creating a p-n diode result in low efficiency. We exploited the noncentral symmetric nature of n-type ZnO nanowire/p-type GaN substrate to create a piezoelectric ! potential within the nanowire by applying stress. Because of the polarization of ions in a crystal that has noncentral symmetry, a piezoelectric potential (piezopotential) is created in the crystal under stress. The piezopotential acts as a "gate" voltage to tune the charge transport and enhance carrier injection, which is called the piezo-phototronic effect. We propose that band modification traps free carriers at the interface region in a channel created by the local piezoelectric charges. The emission intensity and injection current at a fixed applied voltage have been enhanced by a factor of 17 and 4, respectively, after applying a 0.093% compressive strain and improved conversion efficiency by a factor of 4.25. This huge enhanced performance is suggested arising from an effective increase in the local "biased voltage" as a result of the band modification caused by piezopotential and the trapping of holes at the interface region in a channel created by the local piezoelectric charges near the interface. Our study can be extended from ultraviolet range to visible range for a variety of optoelectronic devices that are important for today's safe, green, and renewable energy technology.

Enhanced Heat Dissipation in Gallium Nitride-Based Light-Emitting Diodes by Piezo-phototronic Effect

Enhancing Light Emission of Zno Microwire-Based Diodes by Piezo-Phototronic Effect

Progress in Piezo-Phototronic-Effect-Enhanced Light-Emitting Diodes and Pressure Imaging

Theoretical considerations on efficiency degradation due to thermal effect in a planar GaN-based LED with a GaN substrate

Efficiency enhancement mechanism of piezoelectric effect in long-wavelength InGaN-based LED

Light‐Emitting Diodes: High‐Efficiency, Microscale GaN Light‐Emitting Diodes and Their Thermal Properties on Unusual Substrates (small 11/2012)

High-Efficiency, Microscale Gan Light-Emitting Diodes and Their Thermal Properties on Unusual Substrates

High-output power GaN-LED based on surface plasmon enhancement

Enhanced Light Extraction from a GaN-based Green Light-Emitting Diode with Hemicylindrical Linear Grating Structure.

Study on 3D Thermal Transport in Micro-Leds on GaN Substrate at the Level of Kw/cm2

Piezo-phototronic effect on electroluminescence properties of p-type GaN thin films.

Employing low-temperature barriers to achieve strain-relaxed and high-performance GaN-based LEDs.

Enhanced high-temperature performance of GaN light-emitting diodes grown on silicon substrates

Optimized performances in InGaN/GaN quantum-well membrane based vertical optoelectronics by the Piezo-phototronic effect

Performance Enhancement of Nitrogen-Polar GaN-based Light-Emitting Diodes Prepared by Metalorganic Chemical Vapor Deposition

Piezo-phototronic enhanced dual-wavelength InGaN/GaN multiple quantum wells Micro-LED arrays

Optical Properties of GaN-Based Green Light-Emitting Diodes Influenced by Low-Temperature p-GaN Layer

High-temperature Performance of InGaN-based Amber Micro-Light-emitting Diodes Using an Epitaxial Tunnel Junction Contact

Growth and Characterization of Micro-LED Based on GaN Substrate

Enhancement of Heat Dissipation in Ultraviolet Light‐Emitting Diodes by a Vertically Oriented Graphene Nanowall Buffer Layer

Precise temperature mapping of GaN-based LEDs by quantitative infrared micro-thermography