Abstract:III-V semiconductor light-emitting diodes (LEDs) are a promising candidate for demonstrating electroluminescent cooling. However, exceptionally high internal quantum efficiency designs are paramount to achieving this goal. A significant loss mechanism preventing unity internal quantum efficiency in GaAs-based devices is nonradiative surface recombination at the perimeter sidewall. To address this issue, an unconventional LED design is presented, in which the distance from the central current injection area to the device's perimeter is extended while maintaining a constant front contact grid size. This approach effectively moves the perimeter beyond the lateral spread of current at an operating current density of 101-102 A/cm2. In p-i-n GaAs/InGaP double heterojunction LEDs fabricated with varying sizes and perimeter extensions, a 19% relative increase in external quantum efficiency is achieved by extending the perimeter-to-contact distance from 25 to 250 μm for a front contact grid size of 450 × 450 μm2. Utilizing an in-house developed Photon Dynamics model, the corresponding relative increase in internal quantum efficiency is estimated to be 5%. These results are ascribed to a significant reduction in perimeter recombination due to a lower perimeter-to-surface area (P/A) ratio. However, in contrast to lowering the P/A ratio by increasing the front contact grid size of LEDs, the present method enables these improvements without affecting the required maximum current density in the microscopic active LED area under the front contact grid. These findings aid in the advancement of electroluminescent cooling in LEDs and could prove useful in other dedicated semiconductor devices where perimeter recombination is limiting.

Microfluidic cooling of semiconductor light emission diodes

Size-Dependent Quantum Efficiency of Flip-Chip Light-Emitting Diodes at High Current Injection Conditions

High-Efficiency, Microscale Gan Light-Emitting Diodes and Their Thermal Properties on Unusual Substrates

Compromise between illumination performance and modulation bandwidth for micro-size white light-emitting diode by selecting injected current

A Simulation Study on the Enhancement of the Efficiency of GaN-based Blue Light-Emitting Diodes at Low Current Density for Micro-Led Applications

Enhanced Heat Dissipation in Gallium Nitride-Based Light-Emitting Diodes by Piezo-phototronic Effect

Light‐Emitting Diodes: High‐Efficiency, Microscale GaN Light‐Emitting Diodes and Their Thermal Properties on Unusual Substrates (small 11/2012)

Reduced Surface Recombination in Extended-Perimeter LEDs toward Electroluminescent Cooling

Designs of InGaN Micro-LED Structure for Improving Quantum Efficiency at Low Current Density

A Microjet Array Cooling System for Thermal Management of High-Brightness LEDs

Study on Luminescence Performance of GaN-based μLEDs under High Injection Level

Experimental and Numerical Investigation of A Microjet-Based Cooling System for High Power Leds

Optimized InGaN/GaN Quantum Structure for High-Efficiency Micro-LEDs Displays With Low Current Injection

Optimized GaAs∕AlGaAs Light-Emitting Diodes and High Efficiency Wafer-Fused Optical Up-Conversion Devices

Degradation mechanism beyond device self-heating in high power light-emitting diodes

Electroluminescence refrigeration in semiconductors

Experimental and Numerical Study on a Micro Jet Cooling Solution for High Power LEDs

Effect of Current on the Inhomogeneous Light Emission From AlGaInP-Based Flip-Chip Red Mini-LEDs

Bandwidth Analysis of High-Speed InGaN Micro-LEDs by an Equivalent Circuit Model

Study on 3D Thermal Transport in Micro-Leds on GaN Substrate at the Level of Kw/cm2

Exploring an InGaN Micro-LED structure for optimum IQE operating on low current condition through simulation study