Abstract:We numerically investigated the optical/electrical characteristics of blue light-emitting-diodes (LEDs) and developed some optimization strategies. Our aim is to increase the optical performance of LEDs at low current density (0.02–2 A cm−2) for micro-LEDs used in display applications. First, we investigated the effects of quantum well (QW) number in blue In0.225Ga0.775N/In0.10Ga0.90N LEDs. We found that at low current density LEDs with lower QW number have much higher internal quantum efficiency (IQE) than those with higher QW number. Second, we also numerically investigated the effects of the electron blocking layer, n-side quantum barrier (QB) doping concentration, QB material and QW width with single quantum well (SQW) structure. For SQW LEDs at low current density, the electron injection efficiency was nearly one. In terms of the QB doping concentration, we found that an appropriate n-side QB doping can ensure Shockley-Read-Hall recombination appropriately equal Auger recombination, which ultimately results in high IQE. For QB material, we choose In0.05Ga0.95N as QB material to achieve both high IQE and low forward voltage. Regarding the QW width, we found that although LEDs with wide QW had high IQE, there were also two peaks in the electroluminescence (EL) spectrum, thus 3 nm was used as an optimal QW width. The original 5-QW structure showed a lower IQE range from 50 to 80% at the current density range from 0.01 to 2 A cm−2 and a forward voltage of 3.06 V at 1 A cm−2. In contrast, our optimized LED structure achieved an IQE of 92.3% at the current density range from 0.01 to 2 A cm−2 and a forward voltage of 2.72 V at 1 A/cm2.

Study on Luminescence Performance of GaN-based μLEDs under High Injection Level

Capability of Gan Based Micro-Light Emitting Diodes Operated at an Injection Level of Ka/Cm(2)

Operating Behavior of Micro-Leds on a GaN Substrate at Ultrahigh Injection Current Densities

Operation Behavior Under Extremely High Injection Level for GaN-Based Micron LED

High-output power GaN-LED based on surface plasmon enhancement

Size-Dependent Quantum Efficiency of Flip-Chip Light-Emitting Diodes at High Current Injection Conditions

Improvement of the Emission Intensity of GaN-Based Micro-Light Emitting Diodes by a Suspended Structure

A Simulation Study on the Enhancement of the Efficiency of GaN-based Blue Light-Emitting Diodes at Low Current Density for Micro-Led Applications

Device Simulation on GaN‐LED Operating in Noncarrier Injection Mode for Performance Improvement by Enhancing the Tunneling Effect in Multiquantum Wells

Many-body Effects on the High Injection Level Performance for Micro Light Emitting Diode

Compromise between illumination performance and modulation bandwidth for micro-size white light-emitting diode by selecting injected current

Study on 3D Thermal Transport in Micro-Leds on GaN Substrate at the Level of Kw/cm2

Power-Dependent Optical Characterization of the InGaN/GaN-Based Micro-Light-Emitting-Diode (LED) in High Spatial Resolution

High-temperature Performance of InGaN-based Amber Micro-Light-emitting Diodes Using an Epitaxial Tunnel Junction Contact

Recent Advances on GaN-Based Micro-LEDs

Study of GaN-Based Light-Emitting Diode (LED) With a Hybrid Surface Structure

Research on the Current-voltage Characteristics of GaN-based High Power Flip-chip Blue LED

Investigation on Strain Relaxation Distribution in GaN-based Μleds by Kelvin Probe Force Microscopy and Micro-Photoluminescence

Growth and Characterization of Micro-LED Based on GaN Substrate

Study on the effect of size on InGaN red micro-LEDs

High efficiency InGaN nanowire tunnel junction green micro-LEDs