Abstract:Zirconia is an inorganic, nonmetallic material with excellent properties. However, the brittleness of the zirconia, resulting from the thermal performance during the heating and cooling process, seriously limits the application of zirconia in the metallurgical, military, and aerospace industries. Al2O3 doped ZrO2 was developed to improve the potential material's toughness. This paper studied the evolution of the surface functional groups, phase composition, toughening mechanism, and particle morphology of Al2O3 doped ZrO2 during the heating process. Especially microwave heating was selected as the heating method during the experiments to save energy consumption. The results showed that the phase transition temperature was reduced by the microwave sintering technique, which also promoted the transformation between the m-ZrO2 and t-ZrO2, advancing the crystallinity and structural properties of the samples. The specific surface area shows a positive relationship with the microwave heating temperature, while the particle size of the powder decreased with the temperature increase. The optimized sintering effect appears at 1000 °C in the studied roasting temperature range (800 °C–1200 °C) for Al2O3–ZrO2 powders. With the optimized sintering temperature, the void of the granular zirconia material was controlled, and the best micromorphology was obtained. In practical production, the application of microwave sintering and alumina doping is beneficial to saving costs and protecting the environment.

Advances in Study of Zirconium-Containing Mesoporous Materials

Advances in synthetic technology of organosilicon monomer

Synthesis, Characterization and Application of Submicron ZrSiO4 Powder Via Sol-Gel-microemulsion-hydrothermal Method

Solvothermal Synthesis of Zirconia Nanomaterials: Latest Developments and Future

From modification to mechanism: Supercritical hydrothermal synthesis of nano-zirconia

Recent Advances in the Synthesis of Non-Siliceous Mesoporous Materials

Mechanochemical dehydration and crystallization of supersaturated zirconia–alumina composite nano powders

New Developments in Microporous Materials

Synthesis and Application of Mesoporous Materials: Process Status, Technical Problems, and Development Prospects: A Mini-Review

Facile Synthesis of Zr-Based Functional Materials with Highly Ordered Mesoporous Structures

Mesoporous Yttria-Zirconia Solid Solution with Improved Textural Properties Prepared Via Lauric Acid-Assisted Synthesis

Study on a new, environmentally benign method and its feasibility of preparing nanometer zirconia powder

Rapid and low-temperature preparation of zircon ceramic by hydrothermal-assisted sol-gel process and microwave sintering

Effect of Si/Zr molar ratio on the sintering and crystallization behavior of zircon ceramics

Microstructure and phase transformation behavior of Al2O3–ZrO2 under microwave sintering

Preparation of Mesoporous Zirconia Microspheres As Inert Matrix

Ordered mesoporous sulfated silica-zirconia materials with high zirconium contents in the structure

Study on the process and properties of nano-sized polycrystal zirconia powders by co-precipitation in super-alkaline medium

Effects of zirconium source and content on zirconia crystal form, microstructure and mechanical properties of ZTM ceramics

Microstructure, mechanical and high-temperature dielectric properties of zirconia-reinforced fused silica ceramics

Preparation of Porous Spodumene/zircon Composite Ceramics and Its Thermal and Mechanical Properties