Abstract:In recent years, the MgO-Nd2Zr2O7 composite ceramics inert matrix (IM) was proposed as a candidate for the transmutation of Pu and minor actinides (MA) in light water reactors (LWR) or accelerator driven sub-critical system (ADS). To take full advantage of the pyrochlore structure of Nd2Zr2O7 to accommodate different types of MA and Pu, in this work, Y and Ce co-doped ωMgO-(1-ω) (Nd1-x Y x )2(Zr1-x Ce x )2O7 (M-NYZC) composite ceramics used as a candidate IM for inert matrix fuel were prepared by solid-state one-step sintering method at 1500 °C for 3 h. The phase structure and microstructure of M-NYZC composite ceramics were characterized by XRD and SEM-EDS. Also, the thermal physical properties of M-NYZC composite ceramics including the thermal expansion coefficient and thermal conductivity were investigated systematically. Results from XRD and SEM-EDS showed that the magnesium oxide and NYZC pyrochlore solid solution are intermixed well with each other, and the M-NYZC samples present uniform element distribution with a grain size of about 1 μm. Also, the as-prepared samples possessed well densified microstructure, and the average relative density of all samples could exceed 95%. Moreover, the thermal expansion coefficient and thermal conductivity of 0.5M-0.5NYZC (x = 0, 0.15, 0.2, 0.5, 0.9) samples were located in the range of 13.4 × 10-6-14.4 × 10-6 K-1 and 16.34–3.70 W m-1 K-1 respectively. By comparison, the thermal physical properties of 0.5M-0.5NYZC samples are superior to that of traditional UO2 and MOX fuels. It is suggested that the M-NYZC composite ceramics prepared in this study can meet the thermal physical performances of inert matrix fuel.

Preparation of Mesoporous Zirconia Microspheres As Inert Matrix

Synthesis, Characterization and Application of Submicron ZrSiO4 Powder Via Sol-Gel-microemulsion-hydrothermal Method

A New Approach for Impregnation of Cs into Zirconia Microsphere Matrix

Synthesis of Monolithic Zirconia with Macroporous Bicontinuous Structure Via Epoxide-Driven Sol–gel Process Accompanied by Phase Separation

Sol–gel Synthesis of Mesoporous Spherical Zirconia

Preparation of Mesoporous ZnO Microspheres Through a Membrane-Dispersion Microstructured Reactor and a Hydrothermal Treatment

Synthesis and Characterization of Thermally Stable Mesostructured Sulfated Zirconia by a Novel Sulfate-Assisted Alcohothermal Route

Synthesis and Characterization of Doped Nano-Sized Ceria–zirconia Solid Solutions

Preparation and Characterization of Mesoporous Zirconia Materials by Self-Assembly Method

Effects Of Calcination Temperature And Template Content On The Structure And Properties Of Mesoporous Zirconia Microspheres

Preparation and Thermal Physical Properties of MgO-(Nd1-xYx)2(Zr1-xCex)2O7 Composite Ceramics As a Candidate for Inert Matrix Fuel

Preparation of mesoporous nanocrystalline tetragonal zirconia for catalytic methane combustion

Preparation of ZrO_2 Microspheres Under Microwave Radiation

Preparation and thermal physical properties of MgO-(Nd1-Y )2(Zr1-Ce )2O7 composite ceramics as a candidate for inert matrix fuel

Preparation of MgO-Nd2Zr2O7 composite ceramics used for inert matrix fuel by one-step sintering method

The Effect of Washing Process on the Cracking of ZrO2 Microspheres by Internal Gelation

Preparation and Characterization of Mesoporous Tetragonal Sulfated Zirconia

Preparation of macroporous zirconia monoliths from ionic precursors via an epoxide-mediated sol-gel process accompanied by phase separation

Ordered mesoporous sulfated silica-zirconia materials with high zirconium contents in the structure

Synthesis of Zeolite/Mesoporous Silica Composite Microspheres by Microemulsion Method

Rapid Synthesis of Mesoporous Ceria–zirconia Solid Solutions Via a Novel Salt-Assisted Combustion Process