Abstract:Two compositions Ce0.50Zr0.39La0.04Y0.07O2−δ and Ce0.25Zr0.65La0.04Y0.06O2−δ based on ceria-zirconia solid solutions were prepared as nanopowders using a continuous hydrothermal flow synthesis reactor, followed by either freeze-drying or hotplate-drying of the slurry. Each dried nanopowder was then subjected to 10h heat-treatment at 1000°C, 1100°C or 1200°C in air (to simulate accelerated ageing). The reducibility and hydrogen consumption of the oxidised samples were measured using temperature programmed reduction (TPR) up to 1000°C. The effects of composition, drying method and heat-treatment temperature were evaluated on the TPR profiles of the materials. The powders were further investigated using a range of analytical methods including UV/Vis spectroscopy (which yielded colour data), Raman spectroscopy, powder X-ray diffraction, BET surface area measurements and X-ray photoelectron spectroscopy (XPS). Chemometric methods were used to investigate relationships between the spectroscopic and total oxygen storage capacity (OSC) data. Principal component analysis (PCA) was used to provide a simple interpretation of the effects of various synthesis and treatment parameters on Raman spectra. Principal component regression (PCR) was used to build regression models relating the Raman spectra and the temperature of hydrogen consumption peak at several set temperatures in the TPR. The total hydrogen consumption of the materials was generally high, while the drying and heat-treatment conditions appeared to have a significant effect on the final properties of the resulting powders, such as the surface area and total oxygen storage capacity.

Controlled synthesis of Ce0.8Y0.2O1.9 nanoparticles by reverse microemulsion

Size controlled synthesis of CeO2 nanoparticles by a microemulsion method

A Size-Controllable Precipitation Method to Prepare CeO2 Nanoparticles in a Membrane Dispersion Microreactor

Synthesis and Crystallization of Nano-Ceria Particles by Solvothermal Routes

Controlled Synthesis of CeO2 Nanoparticles from the Coupling Route of Homogenous Precipitation with Microemulsion

Synthesis and Characterization of Doped Nano-Sized Ceria–zirconia Solid Solutions

Synthesis of Ce<sub>0.8</sub>Gd<sub>0.05</sub>Y<sub>0.15</sub>O<sub>1.9</sub> Nanopowders

Synthesis of Ce0.8Gd0.05y0.15O 1.9 nanopowders

Synthesis of Size-Controlled CeF_3 Nanoparticles

Synthesis of Ceo2 Nanoparticles in W O Microemulsion

Solvent Assisted Morphology-Controlled Synthesis of CeO2 Micro/nanostructures

Synthesis and characterisation of CeO2 nanoparticles and rods

General and facile synthesis of ceria-based solid solution nanocrystals and their catalytic properties

The Synthesis of Nanometer Sized CeO2 Particles by the Coupling Route of Microemulsion with Homogeneous Precipitation

CeO2 nanocrystals: Seed-mediated synthesis and size control

Synthesis and Characterization of BaCe<sub>0.8</sub>Y<sub>0.2</sub>O<sub>2.9</sub> Nanopowder by Sol-Gel Auto-Ignited Method

Shape-controlled synthesis of CeOHCO3 and CeO2 microstructures

Controlled Synthesis of CeO 2 Nanoparticles Using Novel Amphiphilic Cerium Complex Precursors

NANO-SCALE Sm0.15Gd0.05Ce0.8O1.9POWDER PREPARED BY COUPLING ROUTES OF SOL-GEL AND LOW TEMPERATURE SELF-PROPAGATING COMBUSTION

Facile Synthesis of Ceria Nanocrystals with Tuneable Size and Shape

Synthesis of Cerium(IV) Oxide Ultrafine Particles by Solid‐State Reactions