Abstract:According to the experimental dataset on the bending strength of AlON-TiN composite synthesized by hot pressing sintering approach under different processing parameters, i.e., mass fraction of TiN, sintering temperature and soaking time, the support vector regression （SVR） approach combined with particle swarm optimization for its parameter optimization, is proposed to simulate the relationship between the bending strength and hot pressing sintering synthesis parameters of AlON-TiN composites. The optimization of process parameters and the multi-factor analysis are also carried out. The prediction result demonstrates that the estimation error of the SVR model is less than that of the artificial neural network（ANN） model under the identical training and test samples and reveales that the generalization ability of SVR model surpasses that achieved by the ANN model. The optimal synthesis parameters are obtained numerically under TiN content 13.5%, sintering temperature 1863.5 ℃ and soaking time 5.8 h. The maximum bending strength is estimated to be 555.452 MPa while the AlON-TiN composite is synthesized at the optimal synthesis parameters. These results suggest that SVR can provide an important theoretical and practical guidance to the research and development of AlON-TiN composite possessing ideal bending strength.

Properties And Structure Of Alon-Vn Composites Synthesized By Hot-Pressing Technique

Study of the AlON-VN Composite Ceramic

Manufacture and properties of AlON-TiN particulate composites

A STUDY ON SYNTHESIS OF AlON BY HOT_PRESS SINTERING

High-pressure synthesis of Al<sub>2</sub>O<sub>3</sub>-cBN composites: Effect of thermodynamic condition and cBN volume fraction on their microstructure and properties

Fabrication of in Situ Ti 2 AlN/TiAl Composites by Reaction Hot Pressing and Their Properties

Synthesis of Tin/Alon Composite Ceramics

Study of Hot-press Sintering Process of Nanometer Cu-Al_2O_3 Composite

Synthesis of CA6/AlON Composite with Enhanced Slag Resistance

Study on the influence of process parameters on the synthesis of AlON-TiN composites by using support vector regression

Microstructural Characteristics and Evolution of Ti2AlN/TiAl Composites with a Network Reinforcement Architecture During Reaction Hot Pressing Process

Effect of the Starting AlN Content on the Phase Formation and Property of the Novel In-Situ Fabricated X-SiAlON/BN Composites

Microstructure, Mechanical Properties and High Temperature Tribological Behavior of NiAl-based Composites

Fabrication and properties of AL2O3-SiAlON composites with nano-sized t- and h-BN dispersion

The Influence Of The Preparation Method On The Microstructure And Properties Of Al2o3/Tin Nanocomposites

Microstructural and mechanical characterization of pressure-less sintered aln -polytypoid based composites by compositional design

In Situ Fabrication and Mechanical Properties of Al–AlN Composite by Hot Extrusion of Partially Nitrided AA6061 Powder

Preparation of High-Performance NiAlV Composite Sheets with Novel Layered Microstructure

Synthesis and Mechanical Properties of TiB2/Ti2AlN Composites Fabricated by Hot Pressing Sintering

MICROSTRUCTURE AND ELECTROCONDUCTIVITY OF TiN-Al2O3 COMPOSITES PREPARED BY HOT-PRESSING