Low Temperature Sintering Microwave Dielectric Ceramic of ZnO-Nb2O5-TiO2 with FeVO4 Addition

邹佳丽,张启龙,杨辉,童建喜,陆德龙
DOI: https://doi.org/10.3321/j.issn:1002-185X.2005.z2.018
2005-01-01
Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering
Abstract:The effects of sintering aid FeVO4 on sintering characteristic, dielectric properties, phases and microstructure of ZnO-Nb2O 5-TiO2 microwave dielectric ceramic were studied in this paper. The sintering temperature was decreased from 1 200°C to 980°C with 3 wt%-10wt% FeVO4 addition. During the course of sintering, FeVO4 formed solid solution with the main ceramic phase ZnTiNb 2O8 concluded by EDS analysis. The formation of solid solution caused the ceramic crystal lattice deformed, and the lattice defects increased accordingly. Then the mass transport process was accelerated. The sintering temperature was decreased due to the liquid-phase and lattice defects of solid solution. With the amount of FeVO4 increasing, Zn 0.15Nb0.3Ti0.55O2 phase and TiO 2 phase increased, the dielectric constant changed a little and the Q · f value decreased owing to the increasing lattice defects and the size inhomogeneous of crystal grain. The microwave dielectric properties of ZnO-Nb2O5-TiO2 ceramic with 4wt% FeVO 4 sintered at 940°C for 2 h is εr=40, Q · f=10 200 GHz(3 GHz), τf=-9×10-6/°C. It can be used to prepare various multilayer microwave components and devices.
What problem does this paper attempt to address?