Abstract:Abstract The goal of the presented research was syntheses of the ultrafine and nanopowder blends by Mechanical Alloying from Fe-W-Al-Ti-Ni-B-C compositions for further application as a precursor for fabrication bulk High-Entropy Alloy (HEA) by explosive compaction technology. The presented paper describes the preliminary investigations of mechanical alloying of Fe-W-Al-Ti-Ni-B-C powders. Laboratory vibrating sieve equipment was used for sorting the initial powders for the reduction of particle size. For the experiments were used powders of Fe-W-Al-Ti-Ni-B-C system consisting of five major metallic and two minor non-metallic B and C elements were used for mechanical alloying. The crystalline coarse Aluminum, Titanium, Carbon and Nickel, fine-grained iron and tungsten and amorphous Boron powders were used as initial components. The Fe, W, Al, Ti and Ni powders were preliminary checked by “Explorer 5000 XRF” by Skyray instrument and verified. Based on the literature review, theoretical investigation and phase diagrams for mechanical alloying were selected two compositions with the following molar ratio: Fe 20 W 15 Al 15 Ti 20 Ni 20 B 5 C 5 ; Fe 25 W 25 Al 10 Ti 15 Ni 15 B 5 C 5 ; The mechanical alloying was realized on the high energy ball mill with zirconium oxide jars and balls. The ball to powder mass ratio was 10:1, the rotation speed was 500rpm. The process was carried out in dry conditions. The time of mechanical alloying was 5h, 10h and 14 h. The powders were prepared for preliminary analyses and assessment of particle size. The SEM and optical microscopy results of mechanical alloying are presented in the paper.

The sintering of tungsten heavy alloy by mechanical alloying

The Effect of A Small Amount of Tungsten on the Microstructure of Mechanically Alloyed Ag37cu63

Fabrication of nanocrystalline supersaturated W–Al alloys with enhanced thermal stability and high sinterability

Tungsten heavy alloy: Nano-crystallinity and alloying induced low temperature sintering, microstructure and mechanical properties

Microstructure and mechanical properties of liquid–phase sintered W@NiFe composite powders

The simultaneous improvement of strength and ductility of the 93W-4.6Ni-2.4Fe prepared by additive manufacturing via optimizing sintering post-treatment

New low-temperature sintering tungsten-nickel-antimony alloy: Microstructure evolution and mechanical properties

Mechanical alloying of ODS tungsten heavy alloys and microstructure development of intermetallic compounds

Synthesis of Ultrafine Fe-W-Al-Ti-Ni-C-B Powders by Mechanical Alloying

Fabrication and Characterization of Tungsten Heavy Alloys with High W Content by Powder Metallurgy

Effect of Mechanical Alloying on the Microstructure and Properties of W–Ti Alloys Fabricated by Spark Plasma Sintering

Study on Mechanical Properties and Microstructure of Cu20Fe80 Alloy Using the Mechanical Alloying

Phase, Microstructure and Properties Evolution of Fine-Grained W–Mo–Ni–Fe Alloy During Spark Plasma Sintering

The effect of fine W particles in matrix phase on mechanical properties of tungsten heavy alloys

A Tungsten Heavy Alloy with Enhanced Performance Prepared by Spark Plasma Sintering from Fine Spherical Tungsten Powders

Microstructure and mechanical properties of fine-grained W-7Ni-3Fe heavy alloy by spark plasma sintering

Effects of Sintering Conditions on Structures and Properties of Sintered Tungsten Heavy Alloy

Effects of Sintering Temperature on Fine-Grained Tungsten Heavy Alloy Produced by High-Energy Ball Milling Assisted Spark Plasma Sintering

Effect of Sintering Temperatures on Grain Coarsening Behaviors and Mechanical Properties of W-NiTi Heavy Tungsten Alloys

Improving mechanical properties of W-Ni 3 Al alloy through Zr element addition: Solid-solution and oxide particle strengthening

Effect of Tungsten on Microstructure and Mechanical Properties of Novel NiMnCrMoWx High-Entropy Alloys Developed by Mechanical Alloying