Abstract:A simple, time- and cost-effective approach for region-selective metalization of polycarbonate (PC) surface has been established by combining photoresist-free UV-patterning with tin- and amine-free silver activating and electroless gold plating. The surface of PC sheets was exposed to the UV lights emitted from a low-pressure mercury lamp through a photomask, the micro pattern on the mask being transferred to the PC surface due to the photochemical generation of carboxyl groups on the UV-exposed region. The UV-exposed PC sheets were then treated with an ammoniacal AgNO3 solution, so that the silver ions were chemisorbed by the photochemically generated carboxyl groups. When the Ag+-adsorbed PC sheet was immersed into an electroless gold plating bath, shiny gold film quickly deposited on the UV-exposed region, resulting in the formation of a micro gold devices on the PC surface. The whole plating process including UV-exposure, surface activating and gold plating can be completed in about 3–4h. Attenuated total reflection Fourier transformation infrared spectrometer (ATR-FT-IR), X-ray photoelectron spectroscopy (XPS), atomic force microscope (AFM) and scanning electron microscope (SEM) were employed to trace the surface change during the plating process. Cyclic voltammetry (CV) and Scotch®-tape test were employed to characterize the electrochemical properties and adhesion strength of the prepared micro gold devices, respectively. The prepared micro gold electrodes were demonstrated for amperometric detection of hydrogen peroxide.

Immersion Plating and its Applications to Printed Circuit Board

Developments and Prospects of Immersion Control System in Immersion Lithography Machine

Region-selective electroless gold plating on polycarbonate sheets by UV-patterning in combination with silver activating

New Technology of Surface Treatment in 21Century

Recent Advances in Electroplating of Through-Hole Copper Interconnection

Intercircuit: Electroplating with Cavities for Fast Fabrication of Complex and High-Performance 3D Circuits

An Immersion Ultrasonic Testing‐Based Research Platform for Studying Electroplating Kinetics

Research Progress on Electroless Copper Plating

Microstructural Characteristics of Immersion Tin Coatings on Copper Circuitries in Circuit Boards

Research Status and Progress of Contamination Control in Immersion Liquid System of Immersion Lithography Machine

Study on Immersion Tin Process by Electrochemical Methods and Molecular Orbital Theory

Investigation of Partial Silver-Plating in Electronic Packaging

3D Lithography and Deposition on Highly Structured Surfaces Using Plasma Surface Modification, SAM Coating, and Contact Displacement Electroless Plating

Research on Applying Direct Plating to Additive Process for Printed Circuit Board

Air-plasma surface modification of epoxy resin substrate to improve electroless copper plating of printed circuit board

Au Plating Failure Prevention on the Electronic Industry

Failure Analysis of Un-Wetting for the Surface Finish on the ENIG

TSV Cu Plating and Implications for CMP

Lecture Series on Final Surface Finishing Process for PCB-V A New Process of Electroless Ni Plating/replacement Au Plating for PCB

Numerical Simulation of Optimizing Plating Uniformity of Interconnect Circuits on Printed Circuit Boards