Abstract:The metallic interconnects are essential components of energy devices such as fuel cells and electrolysis cells, batteries, as well as electronics and optoelectronic devices. In recent years, 3D printing processes have offered complementary routes to the conventional photolithography- and vacuum-based processes for interconnect fabrication. Among these methods, the confined electrodeposition (CED) process has enabled a great control over the microstructure of the printed metal, direct printing of high electrical conductivity (close to the bulk values) metals on flexible substrates without a need to sintering, printing alloys with controlled composition, printing functional metals for various applications including magnetic applications, and for in situ scanning electron microscope (SEM) nanomechanical experiments. However, the metal deposition rate (or the overall printing speed) of this process is reasonably slow because of the chemical nature of the process. Here, we propose using the CED process to print a single layer of a metallic trace as the seed layer for the subsequent selected-area electroless plating. By controlling the activation sites through printing by the CED process, we control, where the metal grows by electroless plating, and demonstrate the fabrication of complex thin-film patterns. Our results show that this combined process improves the processing time by more than 2 orders of magnitude compared to the layer-by-layer printing process by CED. Additionally, we obtained Cu and Ni films with an electrical resistivity as low as ∼1.3 and ∼2 times of the bulk Cu and Ni, respectively, without any thermal annealing. Furthermore, our quantitative experiments show that the obtained films exhibit mechanical properties close to the bulk metals with an excellent adhesion to the substrate. We demonstrate potential applications for radio frequency identification (RFID) tags, for complex printed circuit board patterns, and resistive sensors in a Petri dish for potential biological applications.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c01890?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c01890</a>.SEM images of the single-layer printed Cu and Ni lines with a nozzle diameter of ∼250 μm for different nozzle speeds; The optical images of single-layer Cu and Ni lines printed with different nozzle speeds, and the width and thickness of the printed Cu and Ni lines vs the nozzle speed; The FIB-sectioned cross-sectional images of Cu and Ni films; and The schematic of an unpinned (top) and pinned (bottom) indentation-induced buckle (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c01890/suppl_file/am1c01890_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Intercircuit: Electroplating with Cavities for Fast Fabrication of Complex and High-Performance 3D Circuits

E-Joint: Fabrication of Large-Scale Interactive Objects Assembled by 3D Printed Conductive Parts with Copper Plated Joints

MorphingCircuit: An Integrated Design, Simulation, and Fabrication Workflow for Self-morphing Electronics.

3D Printed Electronics With High Performance, Multi-Layered Electrical Interconnect

Hybrid Additive Manufacturing Method for Selective Plating of Freeform Circuitry on 3D Printed Plastic Structure

Additive Fabrication of 3D Surface Conformal Circuits Using a Modified Screen-Printing Technology

Fabricating functional circuits on 3D freeform surfaces via intense pulsed light-induced zinc mass transfer

Multi-metal 4D Printing with a Desktop Electrochemical 3D Printer

Digital Light Processing 3D Printing of Conductive Complex Structures

Hybrid 3D Printing of Molten Metal Microdroplets and Polymers for Prototyping of Printed Circuit Boards Featuring Interdigitated 3D Capacitors

Thermoformed Circuit Boards: Fabrication of highly conductive freeform 3D printed circuit boards with heat bending

Spatially selective adhesion enabled transfer printing of liquid metal for 3D electronic circuits

Interconnect Fabrication by Electroless Plating on 3D-Printed Electroplated Patterns

Intense Pulsed Light Sintering of Thick Conductive Wires on Elastomeric Dark Substrate for Hybrid 3D Printing Applications

Direct 3D Printing of Hybrid Nanofibers-based Nanocomposites for Highly Conductive and Shape Memory Applications.

Selectively Metalizable Stereolithography Resin for Three-Dimensional DC and High-Frequency Electronics via Hybrid Additive Manufacturing

Next Generation of 3D‐Printed Electronics: Electroplating Inside Channels to Embed 3D Copper Features within Polymeric Structures Fabricated Through Material Extrusion

Unlocking Spatial Surface Energy in Porous Skeletons: A Pathway to Bridging Electronic Circuits from 2D to 3D Architectures

Fast and Efficient Fabrication of Functional Electronic Devices through Grayscale Digital Light Processing 3D Printing

Form‐Factor Free 3D Copper Circuits by Surface‐Conformal Direct Printing and Laser Writing

Unlocking the flexibility of multi-material 3D extrusion printing for soft iontronics