Abstract:Epoxy resin is one of the most common polymers used as part of the insulation system in key electrical assets such as power transformers and hydrogenerators. Thus, it is necessary to know their main characteristics and to evaluate their condition when subjected to High Voltage (HV). A brief review of epoxy resins’ applications as insulating materials is made, their main characteristics as insulating media are given, the improvements with nano-fillers are summarized and the main electric properties required for Partial Discharges (PD) modelling are listed. In addition, the theoretical background and state-of-the-art of the three-capacitance and analytical models for simulating PD in solid dielectrics, such as epoxy resins, are reviewed in detail. Besides, their main advantages and disadvantages are presented, some critical arguments to the modelling procedure and assumptions are made and some improvements are proposed, taking into account conclusions made from other authors using models related to the PD development process. Finally, a case study was simulated using a modified three-capacitance model and the analytical model. The PD rate, q-φ-n diagrams and the minimum, mean and maximum PD electric charge are compared with measurements reported in the literature. Simulation results are in reasonable agreement with measured values. Capacitance models can be implemented in general purpose electric circuit simulation packages; however, its simulation is computationally expensive. Additional to this, although the modified three-capacitance model is not as accurate as finite elements or analytical models, results are also in agreement with real data.

Modeling And Simulation Of Inner Defect In Impulse Storage Capacitor

Effects of Typical Defects on Electrical Fields in High-Voltage (Storage) Capacitors

Thermal Modeling of an Electrolytic Capacitor Bank

Electric field distribution characteristics of composite insulator with internal defect

Electric Field Simulation of Typical Defects in the Epoxy/Paper Composites Insulated Tubular Bus

Research on Power Capacitor Internal Fault Criterion

The Electroquasistatic Field Simulation And Analysis For The Insulation Defects In Xlpe Power Cables

The mechanism of high voltage storage capacitor under large impulse discharge

Simulation of Composite Insulator Interface Defects in Partial Discharge

DCPD Investigation on Inner and Oiliness Defects of High-Voltage Storage Capacitors

A Method To Model Mosfet'S Second Breakdown Action For Circuit-Level Esd Simulation

Study on the Failure Factors of Composite Insulation in High-Voltage Storage Capacitors

Research on Typical Decay-like Fracture Defects of Composite Insulators Based on Electro-Thermal Coupling

Computer Simulation of Partial Discharges in Voids inside Epoxy Resins Using Three-Capacitance and Analytical Models

Analysis of Electric Field Distribution in Capacitors’ Dielectric with Cavities

Phase-Field Modeling of Electromechanical Breakdown in Multilayer Ceramic Capacitors

Numerical Simulation Research on Partial Discharge of Particle Defects at Epoxy Interface Excited by High-Frequency Sinusoidal Voltage

Modeling and Test for Parasitic Resistance and Capacitance Defects in PCM

Simulation Study of Electric Influence Caused by Defects on Uhv Ac Gis Spacer

Modeling of Ultracapacitor Energy Storage Used in Hybrid Electric Vehicle

Simulation for Pulse Discharge Performance of Antiferroelectric Capacitors