Abstract:We report a fast and simple prototyping method to fabricate polymer-based microfluidic chips using Direct Laser Plotting (DLP) technique, by which various functional micro-structures can be realized within minutes, in a mask-free and out-of-cleanroom fashion. A 2D Computer-Aid-Design (CAD) software was employed to layout the required micro-structures and micro-channels, a CO2 laser plotter was then used to construct the microstructures. The desired patterns can be plotted directly on PDMS substrates and bio-compatible polymer films by manipulating the strength and density of laser pulses. With the DLP technique, chip-embedded micro-electrodes, micro-mixers and 3D microfluidic chips with 5 layers, which normally require several days of work in a cleanroom facility, can be fabricated in minutes in common laboratory. This novel method can produce microfluidic channels with average feature size of 100μm, while feature size of 50μm or smaller is achievable by making use of the interference effect from laser impulsion. In this report, we present the optimized parameters for successful fabrication of 3D microchannels, micro-mixers and microfluidic chips for protein concentration measurements (Bovine Serum Albumine (BSA) test), and a novel procedure to pattern flexible embedding electrodes on PDMS-based microfluidic chips. DLP offers a convenient and low cost alternative to conventional microfluidic channel fabrication technique which relies on complicated and hazardous soft lithography process.

Laser Bonding of Multilayer Polymer Microfluidic Chips

Laser Bonding and Packaging of Plastic Microfluidic Chips

Toward On-Chip Unidirectional and Single-Mode Polymer Microlaser

Fabrication of a Thermoplastic Multilayer Microfluidic Chip

Thermal Assisted Ultrasonic Bonding of Multilayer Polymer Microfluidic Devices

Study on ultrasonic fusion bonding for polymer microfluidic chips

A simple approach to fabricate multi-layer glass microfluidic chips based on laser processing and thermocompression bonding

Construction of microfluidic chips using polydimethylsiloxane for adhesive bonding

A simple and cost-effective method for fabrication of integrated electronic-microfluidic devices using a laser-patterned PDMS layer

Photolamination Bonding for Pmma Microfluidic Chips

Fabrication of Fluidic Chips with 1-D Nanochannels on PMMA Substrates by Photoresist-Free UV-lithography and UV-assisted Low-Temperature Bonding

Progress and Research Status of CO2 Laser Machining Polymer Microfluidic Chips

Research on Nano-Imprint Microfabrication and Bonding of Polymer Microfluidic Chips

Bonding of Glass-Based Microfluidic Chips at Low- or Room-Temperature in Routine Laboratory

Wax-bonding 3D microfluidic chips.

Organic Solvent Fumigation Bonding for Multi-Layer Poly(methyl Methacrylate) Microfluidic Device

Microfluidic Channel Fabrication by Pdms-Interface Bonding

Prototyping chips in minutes: Direct Laser Plotting (DLP) of functional microfluidic structures

Laser-induced adhesives with excellent adhesion enhancement and reduction capabilities for transfer printing of microchips

A Low Temperature Ultrasonic Bonding Method for PMMA Microfluidic Chips

Water-assisted CO(2) laser ablated glass and modified thermal bonding for capillary-driven bio-fluidic application