Abstract:A series of hydrocracking catalysts based on mesoporous molecular sieves of MCM-41 and SBA-15 with different silica to alumina ratios was prepared. Nickel and molybdenum were used as active metals to impregnate the extrudates prepared by using molecular sieves. The catalysts were characterized for physical and chemical properties and evaluated for the hydrocraking of desulfurised vacuum gas oil. The conversion of DS-VGO was lower as compared to that of the catalyst based on USY zeolite. However, the gas yield was lower in case of mesoporous materials based catalysts. Introduction Zeolites are widely used as catalysts in petroleum refining and for the production of petrochemicals and fine chemicals. Recently, the breakthrough discovery of the M41S family mesoporous materials [1,2] exemplified by the MCM-41 bearing hexagonal-close-packed channels. Despite the excellent structural properties, the hydrothermal stability of MCM-41 and MCM-41-like mesoporous materials was reported as lower than their counter part zeolites. Recently, a new kind of mesoporous silica, SBA-15, has been synthesized with poly (alkylene oxide) triblock copolymers such as poly (ethylene oxide)-poly (propylene oxide)poly (ethylene oxide) (PEO-PPO-PEO) [3]. Beside its uniform and large pore size channels (4.6-30 nm), SBA-15 possesses thick walls (3.1-6.4 nm). Therefore, it has much higher hydrothermal stability than MCM-41 [3]. Owing to their extremely large surface area (generally exceeding 1000 mg) and ultra large pore size these mesoporous materials have attracted great practical and academic interest as acid-catalyzed reactions of large molecules such as hydroprocessing of residual oil [4-5]. In this study, the preparation of MCM-41 and SBA-15 with Si/Al 10, 20 and hydrocracking catalysts based on these mesoporous materials along with USY zeolite are presented. Commercial USY zeolite used in this study also has mesopores in it. Nickel and molybdenum are impregnated as active metals. Mesoporous materials and hydrocracking catalysts prepared were characterized by XRD, surface are, pore volume, pore-size distribution, particle size measurement, and acidity measurement by FTIR and ammonia TPD. The side crushing strength of the extrudates with alumina binder was also measured by crushing strength tester. The catalysts were evaluated for hydrocracking of desulfurized vacuum gas oil (DS-VGO). The hydrocracking activity was measured by GC-SIMDIST method and sulfur and nitrogen contents of the product were measured by elemental analyzer.

Preparation and Alkylation Performance of HMCM-41 Mesoporous Molecular Sieve

Nanometer β Zeolite Made from Mesoporous Zeolite and Its Hydrocracking Performance

Synthesis and Catalytic Performance of HMCM-49/MCM-41 Composite Molecular Sieve for Alkylation of Phenol with Isopropanol

Synthesis and Characterization of AlMCM-41 Molecular Sieves

Synthesis and Catalytic Performance of MCM-22 Molecular Sieves with High Molar Ratio of SiO_2 to Al_2O_3

Catalytic activities and properties of AlHMS mesoporous molecular sieves

Synthesis and properties of mesoporous molecular sieve MCM-41 from extreme dense system with auxiliary alkanes

[Synthesis and catalytic-isomerization performance of Al-MCM-41 mesoporous sieves]

Adsorptive Separation of Methylalumoxane by Mesoporous Molecular Sieve MCM-41

Micro-mesoporous Composite Molecular Sieves H-ZSM-5/MCM-41 for Methanol Dehydration to Dimethyl Ether: Effect of SiO2/Al2O3 Ratio in H-ZSM-5

Preparation and adsorption denitrification of heteroatoms mesoporous molecular sieve Co-MCM-41

Synthesis of Mesoporous Molecular Sieve Al-MCM-41 in Ammonia Water and Its Characterization

Synthesis of mesoporous molecular sieves and their application as supports for catalysts in F-T synthesis

A high-resolution MAS NMR study on the potential catalysts Mo/HBeta for olefin metathesis: The interaction of Mo species with HBeta zeolite

Preparation of mesoporous Al-MCM-41 with stable tetrahedral aluminum using ionic liquids as a single template

Synthesis of Mesoporous Molecular Sieve Mcm-41 in Extremely Dense System

HYDROGENATION PROPERTIES OF Mo-Ni-P CATALYST ON MCM-41 SUPPORTED

Hydrocracking of Bio-Alkanes over Pt/Al-MCM-41 Mesoporous Molecular Sieves for Bio-Jet Fuel Production

Multinuclear solid-state NMR characterization of the coke on Mo/Hβ-Al2O3 catalyst for olefin metathesis

Study on preparation of hierarchical porous ZSM-5/SAPO-34 composite molecular sieve and its catalytic performance for methanol aromatization

Synthesis and Catalytic Evaluation of Mesoporous Molecular Sieve Supported Hydrocracking Catalysts