Abstract:The chemical heat sink yielded by the catalytic cracking of supercritical hydrocarbons facilitates the thermal management of hypersonic aircraft. The objective of this study was to alleviate the diffusion restriction of supercritical hydrocarbons in conventional microporous zeolite films. A dual template method involving different n (C22-6-6)/n (TPAOH) values was adopted to prepare pillared nanosheet HZSM-5 zeolite films by using seed assisted secondary growth. Compared with those of the parent nanosheet HZSM-5 zeolite film (ZN) prepared using only C22-6-6 as the structure directing agent (SDA), the zeolite film prepared using n (C22-6-6)/n (TPAOH) of 10/4 (DZN-4) after pillaring exhibited a higher surface area (525 m2 g−1) and mesoporous volume (0.453 cm3 g−1). A larger amount of TPAOH in the synthesized solution (n (C22-6-6)/n (TPAOH) < 10/6) induced the formation of a bulky microporous MFI crystal phase, thereby sacrificing the mesoporous structure. At 550 °C and 4 MPa, the DZN-4 zeolite film yielded the highest n-dodecane conversion rate (76.8%) and TOF value (130.9 s−1), due to the presence of highly accessible Brønsted acid sites and ordered mesoporous structures, leading to a heat sink of 2.99 MJ kg−1, which is 32% higher than that under ZN. Restricted secondary reactions, such as hydride transfer and aromatization, were observed in the presence of highly connected mesopores designed by pillaring, leading to high and low selectivities toward olefins and aromatic compounds, respectively. Amorphous coke was detected on the external mesopore surface of DZN-4, and the adhesive strength was significantly enhanced, resulting in a higher catalytic stability.

Nanometer β Zeolite Made from Mesoporous Zeolite and Its Hydrocracking Performance

High Load Rare-earth β Zeolite Prepared by Solid Medium-In-Situ Synthesis Method and Its Catalytic Cracking Performance

STUDY ON THE CATALYTIC PERFORMANCE OF ZEOLITE BETA IN HYDROCRACKING

Mesoporous Materials from Zeolite Seeds As Supports for Nickel Tungsten Sulfide Active Phases

HZSM-5/MCM-41 composite molecular sieves for the catalytic cracking of endothermic hydrocarbon fuels: nano-ZSM-5 zeolites as the source

Effect of Hierarchical ZSM-5 Zeolite Crystal Size on Diffusion and Catalytic Performance of N-Heptane Cracking

A Novel Mcm-41-Beta-Zeolite Composite Molecular Sieve with Mesoporous and Microporous Structure

Synthesis, Characterization, and Catalytic Properties of A Hydrothermally Stable Beta/Mcm-41 Composite from Well-Crystallized Zeolite Beta

Comparative Research on the Supercritical Catalytic Cracking of n-Dodecane and Kerosene Using Nanosheet MFI Zeolite

Synthesis and characterization of composite molecular sieves comprising zeolite Beta with MCM-41 structures

ZSM-5@MCM-41 core–shell composite with tunable shell thickness for n -heptane catalytic cracking reaction

Effects of post treatment of HZSM-5 zeolites on catalytic cracking of butene

A Novel Approach To Prepare Beta-Zeolite/Mcm-41 Composite Molecular Sieve With High Hydrothermal Stability

Synthesis of Isomorphous MFI Nanosheet Zeolites for Supercritical Catalytic Cracking of N-Dodecane

Preparation of nano ZSM-5 with hydrophobic surfaces and application to catalytic cracking of hydrocarbon fuels

Synthesis of pillared nanosheet HZSM-5 zeolite films for catalytic cracking of supercritical n-dodecane

Synthesis and Catalytic Performances of MOR/BEA Core-Shell Composite-Zeolites

Synthesis of mesoporous high-silica zeolite Y and their catalytic cracking performance

Thermostability of Nanosized HZSM-5 Zeolite

Synthesis of nanosheet SSZ-39 zeolite with enhanced catalytic performance in methanol-to-olefins reaction

A new FCC catalyst comprising MCM-41 super-macroporous zeolite