Abstract:In this work, SAPO-11, SAPO-11-γ-Al 2 O 3 and SAPO-11-ZSM-5-γ-Al 2 O 3 molecular sieve supports were prepared by static hydrothermal synthesis, which SAPO-11-γ-Al 2 O 3 and SAPO-11-ZSM-5-γ-Al 2 O 3 supports were loaded with Co and Mo as active metal components. The hydroisomerization properties of n-hexadecane on SAPO-11, SAPO-11-γ-Al 2 O 3 and SAPO-11-ZSM-5-γ-Al 2 O 3 molecular sieves were investigated, as well as the effects of reaction temperature, reaction time, solid–liquid ratio and reaction pressure on the hydroisomerization properties. The results demonstrated that the SAPO-11 molecular sieves synthesized under the ratios of 1Al 2 O 3 :2P 2 O 5 :0.6TEOS:1.2DPA:55H 2 O, crystallization time of 48 h, and crystallization temperature of 180 °C had high crystallinity and uniform size distribution, and the pore structure was more obvious. After loading metals onto the SAPO-11-γ-Al 2 O 3 molecular sieves, the charged metals partially block the pores or pore openings of the molecular sieves, leading to a reduction in specific surface area and pore volume. As a result, some acidic sites become occupied by the metals, weakening the acidity. The results of the hydroisomerization experiments showed that the SAPO-11 molecular sieves achieved maximum isoparaffin selectivity and isoparaffin yield, reaching values of 31.26% and 28.32%, respectively, at 340 °C over a reaction time of 60 min. The selectivity and yield reached maximum of 51.02% and 43.76% at liquid–solid ratio up to 25:1. The selectivity and yield reached maximum values of 55.82% and 51.2% at an initial reaction pressure of 5 MPA. For the SAPO-11-γ-Al 2 O 3 supports, the selectivity and yield the maximum values of 79.50% and 71.49% at a metal Co: Mo loading ratio of 1:3 was achieved. For the SAPO-11-ZSM-5-γ-Al 2 O 3 supports, the selectivity and yield the maximum values of 55.44% and 54.05% were achieved with ZSM-5 loading of 30 wt%. These catalysts have the potential for a wide range of applications.

Synthesis and Catalytic Performance of HMCM-49/MCM-41 Composite Molecular Sieve for Alkylation of Phenol with Isopropanol

Preparation and Alkylation Performance of HMCM-41 Mesoporous Molecular Sieve

Synthesis and characterization of MCM-49/ZSM-35 composite zeolites in the hexamethyleneimine and cyclohexamine system

Catalytic and deactivated behavior of SAPO-34/ZSM-5 composite molecular sieve synthesized by in-situ two-step method

Synthesis and characterization of TiO2-V2O5-MCM-41 for catalyzing transesterification of dimethyl carbonate with phenol

[Synthesis and catalytic-isomerization performance of Al-MCM-41 mesoporous sieves]

An atom-economic reaction for synthesis of 1-phenoxy-2-propanol over Al2O3/MgO

The preparation of Fe3+ ion-exchanged mesopore containing ZSM-5 molecular sieves and its high catalytic activity in the hydroxylation of phenol

Characterization and Performance of SO42- / SnO2 / MCM-41 for α-pinene Isomerization

Study on preparation of hierarchical porous ZSM-5/SAPO-34 composite molecular sieve and its catalytic performance for methanol aromatization

Micro-mesoporous Composite Molecular Sieves H-ZSM-5/MCM-41 for Methanol Dehydration to Dimethyl Ether: Effect of SiO2/Al2O3 Ratio in H-ZSM-5

Synthesis and Catalytic Performance of MCM-22 Molecular Sieves with High Molar Ratio of SiO_2 to Al_2O_3

Synthesis and Characterization of AlMCM-41 Molecular Sieves

Influence of Preparation Method on HZSM-5 Supported Cerium Catalyst for Alkylation of Phenol with Methanol

Synthesis of Hierarchical MeAPO-5 Molecular Sieve and Optimization of its Catalytic Oxidation of Benzene to Phenol Based on Response Surface Method

Preparation and n-hexadecane hydroisomerization properties of SAPO-11-based composite molecular sieve

Catalytic dehydration of methanol to dimethyl ether over micro–mesoporous ZSM-5/MCM-41 composite molecular sieves

Synthesis, Characterization, and Catalytic Properties of A Hydrothermally Stable Beta/Mcm-41 Composite from Well-Crystallized Zeolite Beta

Composite ZSM-5/MCM-41 material obtained from a green resource and its enhanced catalytic performance in the reaction of vinyl acetate and isoamyl alcohol

Synthesis of FER/MFI composite zeolite using isopropylamine as a structure-directing agent

MCM-56 stabilization synthesis using auxiliary tetraethylammounium ions: Its role to inhibit surface Si-O-Al bridged linkage and retain highly delaminated structure