Abstract:Copper based catalysts with excellent catalytic activity and hydrogen selectivity are widely used in methanol steam reforming (MSR). Yet, the hydrogen pre-reduction step results in hydrogen consumption and energy loss. In addition, the copper nanoparticles are extremely sintered (≥ 300 ℃) to render deactivation caused by the low Taman temperature of 407 ℃. To solve these specific problems, a nano Cu2O/ZnO catalyst with double copper active sites (Cu+ and Cu0) was designed. Cu+ with high reducibility could lessen the catalyst's self-activation time using methanol as the hydrogen carrier. Nano ZnO could support and scatter the active components, effectively prevent the sintering and aggregation of copper nanoclusters. Furthermore, the synergy between the carrier and the active components existed according to H2-TPR. In order to maximize the hydrogen yield and reduce undesirable CO, the quadratic polynomial functions were established to investigate the effects of temperature (T = 450–550 °C), molar ratio of steam to carbon (SCMR=1.5–2.5 mol/mol), and weight-hour space velocity (WHSV=4–6 h−1) on H2 yield (HY) and potential H2 yield (PHY) based on the response surface methodology (RSM) in conjunction with the Box-Behnken design (BBD). The HY (92.1%) and PHY (97.2%) were obtained under T = 550 °C, SCMR= 2.0 mol/mol, and WHSV= 4.7 h−1. Within 36 h, stable 99% hydrogen selectivity was attained at 550 °C. The activity is induced by a new double copper active reaction path substituting the conventional Cu0-determined path. These discoveries provide a basis for the development of efficient catalysts with commercial potential.

Methanol Steam Reforming Reactions on CuZn(Zr)AlO Catalyst

Methanol Steam Reforming for Hydrogen Production over CuZnZrOx: Promotion Effect of Cu

Hydrogen Production Via Steam Reforming of Methanol on Cu/ZnO/Al2O3 Catalysts: Effects of Al2O3 Precursors

Hydrogen Production via Methanol Steam Reforming over CuO/ZnO/Al2O3 Catalysts Prepared via Oxalate-Precursor Synthesis

Methanol Steam Reforming over ZnO/ZnZrOx: Performance Enhanced with a Cooperative Effect

Fe–Ni–Ce–Zr-modified CuO–ZnO catalyst for methanol steam reforming

Hydrogen production via steam reforming of methanol using Cu/ZnO/Al 2 O 3 : Effect of catalyst synthesis method and Cu to Zn molar ratio on physico-chemical properties and catalytic performance

Cu/ZnO/Al2O3 Catalyst Modulated by Zirconia with Enhanced Performance in CO2 Hydrogenation to Methanol

Performance of Cu/ZnO/Al2O3 Catalysts Prepared by Sol–Gel Methods on Methanol Steam Reforming

Steam Reforming of Dimethyl Ether over Coupled Catalysts of CuO-ZnO-Al2O3-ZrO2 and Solid-acid Catalyst

A highly efficient Cu/ZnOx/ZrO2 catalyst for selective CO2 hydrogenation to methanol

A Highly Efficient Cu/Zno/Al2o3 Catalyst Via Gel-Coprecipitation of Oxalate Precursors for Low-Temperature Steam Reforming of Methanol

Steam reforming of ethanol for hydrogen production over NiO/ZnO/ZrO2 catalysts

Achieving strong thermal stability in catalytic reforming of methanol over in-situ self-activated nano Cu2O/ZnO catalyst with dual-sites of Cu species

Effect of Cu and Zn on the performance of Cu-Mn-Zn/ZrO2 catalysts for CO2 hydrogenation to methanol

Hydrogen Production by Steam Reforming of Ethanol over CuO-La_2O_3/ZrO_2 Catalyst

Steam Reforming of Dimethyl Ether over Coupled Zsm-5 and Cu-Zn-Based Catalysts

Modulation of Al2O3 and ZrO2 composite in Cu/ZnO-based catalysts with enhanced performance for CO2 hydrogenation to methanol

High-performance Cu/ZnO/Al2O3 catalysts for methanol steam reforming with enhanced Cu-ZnO synergy effect via magnesium assisted strategy

High-Performance Cu/ZnO/Al 2 O 3 Catalysts for CO 2 Hydrogenation to Methanol

Development of highly stable catalyst for methanol synthesis from carbon dioxide