Abstract:Lower turn-on field (E TO) and threshold field (E THR), as well as a higher current density, are desired characteristics of materials and structures for field emission (FE) applications. In this work, the properties of a boron-doped diamond (BDD) hollow nanoneedle array (HNNA) structure were remarkably enhanced through surface state modulation. By designedly controlling the surface roughness and boron concentration of the BDD film, a uniform and dense HNNA with a high aspect ratio (∼21.3) was constructed by applying O2 + Cl2 inductively coupled plasma reactive ion etching (ICP-RIE) for an optimal duration (90 min). Although the maximum HNNA density (∼5.5 × 106 mm–2) is produced at a shorter duration, the overall FE performance is even worse than that of the BDD film without an HNNA, arising from the field shielding effect and incomplete elimination of defective needles. The finally formed Actiniaria tentacle-like HNNA structure is associated with the masking role of oxidized Si and amorphous carbon on the top edge of the needle embryos, resulting from the electric field edge effect and Si supply accompanying the substrate. Meanwhile, the sp2 carbon generated by ICP-RIE on the surface of the as-etched HNNA promotes the FE, showing a minimum E TO of 0.11 V/μm. After moderate hydrogen plasma treatment, owing to the negative electron affinity (NEA) of C–H on p-type BDD with downward band bending of the conduction band minimum and local electric field enhancement induced by the hollow nanostructure, the hydrogen-terminated BDD–HNNA shows excellent FE stability and a linear Fowler–Nordheim relation with a lower E TO of 0.38 V/μm and E THR of 2.21 V/μm and a desirable current density of 6532 μA/cm2 at 3.75 V/μm. The comprehensive FE properties of the surface-modulated high-quality BDD–HNNA exceed those of the vast majority of other conventional or popular nanostructural counterparts.

Field Emission from Aln Nanoneedle Arrays

Aln Nanorod and Nanoneedle Arrays Prepared by Chloride Assisted Chemical Vapor Deposition for Field Emission Applications

Efficient field emission from ZnO nanoneedle arrays

Field emission from AlGaN nanowires with low turn-on field

Patterned Growth and Field Emission Properties of AlN Nanocones

Synthesis and field emission properties of aluminum nitride nanocones

Field Emission Properties of Well-Ordered Zno Nanoneedle Arrays

Construction of AlN-Based Core–Shell Nanocone Arrays for Enhancing Field Emission

Controlled Growth and Field Emission of Vertically Aligned AlN Nanostructures with Different Morphologies

Low-Temperature Growth and Field Emission Property of AlN Nanocones

Vertically Aligned Boron-Doped Diamond Hollow Nanoneedle Arrays for Enhanced Field Emission

Low temperature growth of vertically aligned AlN nanocone arrays without catalysts and investigation on their field emission behaviors

Patterned Growth of AlN Nanowires and Investigation on Their Field Emission Properties

Well-aligned SiC nanoneedle arrays for excellent field emitters

Stable, Self-Ballasting Field Emission from Zinc Oxide Nanowires Grown on an Array of Vertically Aligned Carbon Nanofibers

High Performance Field Emission Cathode based on the Diamond Nanowires Prepared by Nanocrystalline Diamond Films Annealed in Air

High Emission Current Density, Vertically Aligned Carbon Nanotube Mesh, Field Emitter Array

Enhanced Electron Field Emission from Oriented Columnar AlN and Mechanism

Tuning the Field Emission Properties of AlN Nanocones by Doping

Vertically aligned one-dimensional AlN nanostructures on conductive substrates: Synthesis and field emission

Enhanced Field Emission from Large-Area Arrays of W18o49 Pencil-Like Nanostructure