Abstract:NiAl intermetallics is considered to be a potential high temperature structural material based on a high melting point, low density, high thermal conductivity, excellent oxidation and hot-corrosion resistance at elevated temperatures [1–4], but its high temperature strength is insufficient for the majority of actual applications. The tensile ductility and fracture toughness at ambient temperatures are often also unsatisfactory [5, 6]. The solid solution strengthening, precipitation strengthening, directional solidification and single crystal technique have been explored to improve its high temperature strength. Although significant progress has been achieved, the ambient tensile ductility and fracture toughness often deteriorate as a result. On the other hand, the ductility and toughness can also be improved by microalloying, macroalloying and plastic secondary phase additions, but this is at the expense of the strength [4–7]. In other words, it is very difficult to compromise its high temperature strength and ambient temperature ductility. This severely restricts its operating temperature and deteriorates its machinability. It is significant to explore novel fabricaturing techniques for NiAl intermetallic alloy to improve its comprehensive mechanical properties. Preparing intermetallic matrix composite is an effective method to produce engineering NiAl intermetallic alloy and to improve its high temperature strength and retain ambient temperature ductility simultaneously [8, 9]. Good ductility can be obtained through adequately alloying the intermetallic matrix while the strength is improved with the reinforcements. The casting, combustion synthesis, powder metallurgy and mechanical alloying are major methods for preparing NiAl intermetallic matrix composites. Nevertheless, in many cases, the mechanical bonding due to no interfacial reaction, or the brittle reactive products existing at the interface between matrix and reinforcement due to excessive interfacial reaction often result in weak interfacial bonding so that whole properties

Layered Structure of Ni-Al Multi-Layered Metal-Intermetallic Composites Fabricated by In-Situ Reactions

Microstructures and properties of in situ synthesis Ni/Ni-Al multilayer composites

Reaction Synthesis of Ni/Ni3Al Multilayer Composites Using Ni and Al Foils: High-temperature Tensile Properties and Deformation Behaviour

Microstructure and formation mechanism of Ni-Al intermetallic compounds fabricated by reaction synthesis

Reaction Synthesis of Nickel/Aluminide Multilayer Composites Using Ni and Al Foils: Microstructures, Tensile Properties, and Deformation Behavior

The microstructure and mechanical properties of reaction synthesized Ni-Al intermetallic sheets by pure Ni/Al foils with different thickness ratios

In situ fabrication of α-Al2O3 and Ni2Al3 reinforced aluminum matrix composites in an Al–Ni2O3 system

The Mechanical Properties of Intermetallic Ni50−xTi50Alx Alloys (X=6,7,8,9)

Formation and Precipitation Phases of Ni-Al System Intermetallic Surfacing Layers by Light Beam Heating

Direct Laser Fabricated in Situ TiC Particulate Reinforced Ni30Al20Fe Intermetallic Matrix Composite

Multi-component Phase-Field Simulation of Microstructural Evolution and Elemental Distribution in Fe–Cu–Mn–Ni–Al Alloy

Microstructural evolution and mechanical properties of Ni/Al reactive nanolaminates with different NixAly intermetallic phases

Chemical reactions of Ni/Al multilayers upon ultrahigh compressive load at ambient temperature

Patterned intermetallic reaction of Ni3Al by laser interference structuring

An In-Situ TEM Investigation on Microstructure Evolution of Ni-25 At.% Al Thin Films

Atomic insights into shock-induced alloying reaction of premixed Ni/Al nanolaminates

Solid-state Reaction to Synthesize Ni-Mo Metastable Alloys

Investigating the Influence of Al Contents on Microstructure and Mechanical Properties of Ni 3 Al Superalloy Fabricated by Twin Wire‐Based Direct Arc Energy Deposition

Microstructures and Mechanical Behaviors of NiAlFe Intermetallic Compounds

P phase precipitation and strengthening behavior of a novel polycrystalline Ni 3 Al-based intermetallic alloy at 1100 °C

Phase Composition of Heat-Resistant Layered Coatings of the Al–Cr–Ni System