Abstract:Accurate assessment of fracture behavior and life prediction of cracked materials based on the mixed mode fracture criteria is of utmost importance in fracture mechanics. In this study, the modified fracture criteria incorporating T-stress for mixed mode I-II cracks were comprehensively reviewed. Additionally, a comparative analysis was conducted between the experimental results obtained from five different cracked configurations and the theoretical predictions according to these modified criteria. Moreover, a brief discussion was held regarding the effect of T-stress on both crack initiation angle and fracture toughness, accompanied by providing some suggestions. The results revealed that the predictive accuracy of modified criteria exhibited noticeable variations across different cracked configurations due to the significant disparities in both the sign and magnitude of T-stress around the crack tip. However, it was observed that the predicted curves based on the modified fracture criteria for the semi-circular bend and edge-crack triangular specimens had remarkable similarities owing to their similar biaxial stress ratio B. When the mode II loading dominated, the generalized maximum tangential stress, generalized minimum strain energy density and generalized averaged strain energy density criteria were suitable for the semi-circular bend, edge-crack triangular, central crack rectangular and short bend beam specimens with positive T-stresses, whereas the maximum tangential strain, generalized maximum tangential stress and generalized maximum tangential strain energy density criteria could provide better theoretical predictions for central cracked Brazilian disk specimens having a negative T-stress.

A New Criterion of Fatigue Growth of Mixed-Mode Crack

Fatigue Growth Analysis of an Inclined Crack under Uniaxial Cyclic Loading in Materials with Different Yield Strengths in Tension and Compression

Mixed-mode Fatigue Crack Growth Prediction in Biaxially Stretched Sheets

Towards Fully Automatic Modelling of the Fracture Process in Quasi-Brittle and Ductile Materials: a Unified Crack Growth Criterion

THE MIXED-MODE PROPAGATION OF FATIGUE CRACK IN CTS SPECIMEN

Numerical Investigation of Mixed-Mode Crack Growth in Ductile Material Using Elastic–plastic XFEM

Mixed-mode Fracture Criteria for the Materials with Different Yield Strengths in Tension and Compression

Computational analysis of mixed-mode fatigue crack growth in quasi-brittle materials using extended finite element methods

Progress in Complex 2d and 3d Cohesive Fracture Modelling Considering Random Heterogeneity

Numerical prediction based on XFEM for mixed-mode crack growth path and fatigue life under cyclic overload

A GENERAL CONSTITUTIVE RELATION FOR FATIGUE CRACK GROWTH ANALYSIS OF METAL STRUCTURES

Stress Intensives and Propagation of Mixed-Mode Cracks

Multiple Crack Fatigue Growth Modeling by Displacement Discontinuity Method with Crack-Tip Elements

A Boundary Element Modeling of Fatigue Crack Growth in a Plane Elastic Plate

Prediction of Low Cycle Fatigue Crack Growth under Mixed-mode Loading Conditions Using Cohesive Zone Models

A fracture equation of mixed mode cracks

A Plastic Fracture Mechanics Model for Characterization of Multiaxial Low-Cycle Fatigue

3D-generalized maximum tangential strain criterion for predicting mixed-mode I/II/III fracture initiation of brittle materials considering T-stress effects

Application of modified fracture criteria incorporating T-stress for various cracked specimens under mixed mode I-II loading

A Universal Crack Extension Criterion Based on the Equivalent Stress Gradient: I. Theory and Numerical Verification

Assessment of low cycle fatigue crack growth under mixed-mode loading conditions by using a cohesive zone model