Abstract:Based on the analytical solution of Crouch to the problem of a constant discontinuity in displacement over a finite line segment in an infinite elastic solid, in the present paper, the crack-tip displacement discontinuity elements, which can be classified as the left and the right crack-tip elements, are presented to model the singularity of stress near a crack tip. Furthermore, the crack-tip elements together with the constant displacement discontinuity elements presented by Crouch and Starfied are used to develop a numerical approach for calculating the stress intensity factors (SIFs) of general plane cracks. In the boundary element implementation, the left or the right crack-tip element is placed locally at the corresponding left or right crack tip on top of the constant displacement discontinuity elements that cover the entire crack surface and the other boundaries. The method is called the hybrid displacement discontinuity method (HDDM). Numerical examples are given and compared with the available solutions. It can be found that the numerical approach is simple, yet very accurate for calculating the SIFs of branched cracks. As a new example, cracks emanating from a rhombus hole in an infinite plate under biaxial loads are taken into consideration. The numerical results indicate the efficiency of the present numerical approach and can reveal the effect of the biaxial load on the SIFs. In addition, the hybrid displacement discontinuity method together with the maximum circumferential stress criterion (Erdogan and Sih) becomes a very effective numerical approach for simulating the fatigue crack propagation process in plane elastic bodies under mixed-mode conditions. In the numerical simulation, for each increment of crack extension, remeshing of existing boundaries is not required because of an intrinsic feature of the HDDM. Crack propagation is simulated by adding new boundary elements on the incremental crack extension to the previous crack boundaries. At the same time, the element characters of some related elements are adjusted according to the manner in which the boundary element method is implemented.

A Universal Crack Extension Criterion Based on the Equivalent Stress Gradient: I. Theory and Numerical Verification

Towards Fully Automatic Modelling of the Fracture Process in Quasi-Brittle and Ductile Materials: a Unified Crack Growth Criterion

A New Criterion of Fatigue Growth of Mixed-Mode Crack

Numerical Investigation of Mixed-Mode Crack Growth in Ductile Material Using Elastic–plastic XFEM

Application of modified fracture criteria incorporating T-stress for various cracked specimens under mixed mode I-II loading

An Energy-Based Crack Growth Criterion for Modelling Elastic-Plastic Ductile Fracture

Stress Intensives and Propagation of Mixed-Mode Cracks

Applications of Normal Stress Dominated Cohesive Zone Models for Mixed-Mode Crack Simulation Based on Extended Finite Element Methods

A Generalized Maximum Energy Release Rate Criterion for Mixed Mode Fracture Analysis of Brittle and Quasi-Brittle Materials

3D-generalized maximum tangential strain criterion for predicting mixed-mode I/II/III fracture initiation of brittle materials considering T-stress effects

A Modified G Criterion Considering T-stress and Differentiating the Separation and Shear Failure in Crack Propagation

The Stress Field Near the Blunt Crack Tip and the Fracture Criterion

Application of the Unified Strength Theory in Analyzing Fracture Strength

Mixed Scheme of the Finite Element Method as a Basis for Computational Analysis of Model Crack Mechanics Problems

A general mixed-mode brittle fracture criterion for cracked materials

Fatigue Growth Analysis of an Inclined Crack under Uniaxial Cyclic Loading in Materials with Different Yield Strengths in Tension and Compression

Strain Factor Ratio Criterion for Crack Extension in Anisotropic Plates

Stress intensity factors for asymmetric branched cracks in plane extension by using crack-tip displacement discontinuity elements

A New Criterion Based on the Ratio of Strain Energy Density for Mixed-Mode Crack Initiation Prediction in Ductile Materials

An Efficient and Accurate Numerical Method of Stress Intensity Factors Calculation of a Branched Crack

A Homogenization-Based Phase Field Approach to Fracture with Explicit Dependence on Local Crack Orientation