Abstract:A weak interface model with a predefined traction-separation relationship (denoted as the cohesive zone law), when embedded in a bulk solid, is oftentimes adopted to simulate the crack advancement and thus determine the crack resistance under either monotonic or cyclic loading conditions. To-date, various types of loading-unloading irreversibility and hysteresis are only presumed in the cohesive zone law for fatigue crack growth, but without any direct determination from experimental measurements. Using a fine-grained Mg alloy and synchrotron X-ray diffraction (S-XRD) measurements with a sub-millimeter beam, in situ lattice strain mapping can be obtained with the needed resolution to cover both the "messy" process zone as modeled by the cohesive zone law and the "clean" process zone caused by plastic deformation. We extend our previously developed nonlinear field projection method, and create trial elastic fields from the S-XRD-measured elastic strain fields at different loading levels when choosing the fully unloaded state as the new reference. From the Maxwell-Betti's reciprocal theorem, we reconstruct a mechanistic cohesive zone law for fatigue cracks, where the reciprocity gap is governed by the residual stress field at the fully unloaded state. Combining our inverse approach with S-XRD measurements, it is discovered that the fatigue-crack cohesive zone exhibits a bilinear unloading and reloading behavior that is distinctively different than all prior works. This particular form suggests the origin of irreversibility be primarily from crack-surface oxidation and the hysteresis from dislocation plasticity in surrounding grains.

Assessment of low cycle fatigue crack growth under mixed-mode loading conditions by using a cohesive zone model

Prediction of Low Cycle Fatigue Crack Growth under Mixed-mode Loading Conditions Using Cohesive Zone Models

Cohesive zone modelling of low cycle fatigue cracks in cracked and notched specimens

Mechanistic Modeling of Fatigue Crack Growth in Asphalt Fine Aggregate Matrix under Torsional Shear Cyclic Load

Applications of Normal Stress Dominated Cohesive Zone Models for Mixed-Mode Crack Simulation Based on Extended Finite Element Methods

Computational Boundary Layer Approaches for Fatigue Crack Propagation under Mixed‐mode Loading Conditions

Application of a Cohesive Zone Model for Simulating Fatigue Crack Growth from Moderate to High <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML" id="M1"><mml:mi mathvariant="normal">Δ</mml:mi><mml:mi>K</mml:mi></mml:math> Levels of Inconel 718

Rate dependent cohesive zone model for fatigue crack growth

Application Of A Cohesive Zone Model For Simulating Fatigue Crack Growth From Moderate To High Delta K Levels Of Inconel 718

A cohesive model for the rupture of concrete by low‐cycle fatigue

A Thermodynamically Consistent Cohesive Zone Model for Mixed-Mode Fracture

Critical Remarks to Cohesive Zone Modeling for Three-Dimensional Elastoplastic Fatigue Crack Propagation

Progress in Complex 2d and 3d Cohesive Fracture Modelling Considering Random Heterogeneity

Prediction of Fatigue Crack Growth Retardation Using a Cyclic Cohesive Zone Model

Cyclic cohesive zone model damage parameter acquisition for fatigue crack growth considering crack closure effect

Verification Of A Cohesive Zone Model For Ductile Fracture

Experimental and numerical investigations of crack growth of hot-rolled steel Q420C using cohesive zone model

A New Cohesive Crack Tip Symplectic Analytical Singular Element Involving Plastic Zone Length for Fatigue Crack Growth Prediction under Variable Amplitude Cyclic Loading

Mechanistic Cohesive Zone Laws for Fatigue Cracks: Nonlinear Field Projection and In Situ Synchrotron X-Ray Diffraction (S-XRD) Measurements

Cohesive Zone Modeling for 3D Ductile Crack Propagation

Fatigue Crack Propagation in Heterogeneous Materials under Remote Cyclic Loading