Abstract:A high cycle fatigue life prediction model based on continuum damage mechanics, crystal plas-ticity and critical distance theory is developed. A novel damage evolution law for anisotropic Ni-based single crystal materials built on continuum damage mechanics is proposed. The crystal plasticity framework was introduced to take into account the particular characteristics of high cycle fatigue. The critical distance theory was innovatively applied to the structure of film cooling holes to predict the lifetime for materials under a multiaxial stress state. High cycle fatigue tests considering drilling technology, stress ratio and creep time were performed using Ni-based single crystal superalloy plates with film cooling holes. The constitutive equations were implemented into a finite element framework to simulate the high cycle fatigue properties of Ni-based single crystal superalloys, and the results of numerical calculations were compared with experimental observations. It was demonstrated that the constitutive formulations proposed in the present study can be used to model the mechanical behavior of Ni-based single crystal superalloys under a multiaxial stress state. The life prediction errors are found to be within the factor-of-three scatter band. The fatigue life of the specimen with ultrafast laser drilled film cooling holes is larger than that with electrostream machined film cooling holes under the same test conditions. The fatigue strength of the specimen with film cooling holes at a stress ratio R = 0.95 is higher than that at a stress ratio R =-1. The life of the specimen with film cooling holes is found to decrease with increasing creep time before high cycle fatigue. The gamma/gamma'-microstructure evolution in the speci-mens with film cooling holes is related to the kinetics of the stress redistribution during the fa-tigue process. A minimum stress level is essential for rafting to occur. The damage distribution for the plate model is in line with the crack initiation location and propagation region of the specimen.

Prediction of Fatigue Crack Growth Retardation Using a Cyclic Cohesive Zone Model

Mechanistic Modeling of Fatigue Crack Growth in Asphalt Fine Aggregate Matrix under Torsional Shear Cyclic Load

Prediction of Low Cycle Fatigue Crack Growth under Mixed-mode Loading Conditions Using Cohesive Zone Models

Low-cycle Fatigue Behavior and Life Prediction of TA15 Titanium Alloy by Crystal Plasticity-Based Modelling

Application of a Cohesive Zone Model for Simulating Fatigue Crack Growth from Moderate to High <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML" id="M1"><mml:mi mathvariant="normal">Δ</mml:mi><mml:mi>K</mml:mi></mml:math> Levels of Inconel 718

Application Of A Cohesive Zone Model For Simulating Fatigue Crack Growth From Moderate To High Delta K Levels Of Inconel 718

High Cycle Fatigue Life Prediction Model Based on Crystal Plasticity and Continuum Damage Mechanics for Ni-based Single Crystal Superalloys under a Multiaxial Stress State

Subsurface Crack Nucleation and Growth Behavior and Energy-Based Life Prediction of a Titanium Alloy in High-Cycle and Very-High-cycle Regimes

An Analytical Model for Fatigue Crack Propagation Prediction with Overload Effect

Experimental Estimation of the Probability Distribution of Fatigue Crack Growth Lives

A Combined CP Theory and TCD for Predicting Fatigue Lifetime in Single-Crystal Superalloy Plates with Film Cooling Holes

Cohesive zone modelling of low cycle fatigue cracks in cracked and notched specimens

Modeling of Fatigue Crack Propagation

A New Cohesive Crack Tip Symplectic Analytical Singular Element Involving Plastic Zone Length for Fatigue Crack Growth Prediction under Variable Amplitude Cyclic Loading

Cyclic Plastic Zone-Based Notch Analysis and Damage Evolution Model for Fatigue Life Prediction of Metals

Cyclic Deformation and Microcrack Initiation During Stress Controlled High Cycle Fatigue of a Titanium Alloy

Cyclic Plasticity and Fatigue Crack Growth

Prediction of Fatigue Life of TC4 Titanium Alloy Based on Normalized Equivalent Initial Flaw Size Model

Rate dependent cohesive zone model for fatigue crack growth

A modified damage-coupled viscoplastic constitutive model for capturing the asymmetric behavior of a nickel-based superalloy under wide creep-fatigue loadings

Very High Cycle Fatigue of TC4 Titanium Alloy under Variable Stress Ratio: Failure Mechanism and Life Prediction