Abstract:Experimental observations indicate that fast crack growth often exhibits a rate dependency, which is caused by the viscosity of the material and the dissipation of energy resulting from the branching of microcracks. To address this phenomenon in simulation modeling, this study introduces a rate-dependent augmented finite element method designed for analyzing fast arbitrary crack growth. The method utilizes the maximum principal stress criterion to simulate arbitrary crack growth and predict the path of crack growth. The elements where crack growth is expected are divided into subelements, and they are re-assembled by incorporating rate-dependent cohesive elements between them to construct augmented finite elements. The cohesive elements are based on a rate-dependent trapezoid traction–separation relationship, where the critical traction and fracture toughness are modeled as functions of the separation rate and crack growth speed. The augmented finite elements only contain external nodal degrees of freedom (DoFs), while internal nodal DoFs are condensed. They can be utilized as conventional elements. A numerical algorithm based on the proposed method was developed in this article, and it was implemented in ABAQUS via user element subroutine. The effectiveness of this method and algorithm is validated through an example of dynamic crack growth in a double cantilever beam. The results demonstrate agreement with experimental and computational findings reported in the literature. Additionally, the method was applied to other structures, yielding reasonable outcomes. Analysis of these examples confirms the method's utility in predicting fast arbitrary crack growth under dynamic load conditions.

Rate dependent cohesive zone model for fatigue crack growth

Mechanistic Modeling of Fatigue Crack Growth in Asphalt Fine Aggregate Matrix under Torsional Shear Cyclic Load

Prediction of Low Cycle Fatigue Crack Growth under Mixed-mode Loading Conditions Using Cohesive Zone Models

Cohesive zone modelling of low cycle fatigue cracks in cracked and notched specimens

Application of a Cohesive Zone Model for Simulating Fatigue Crack Growth from Moderate to High <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML" id="M1"><mml:mi mathvariant="normal">Δ</mml:mi><mml:mi>K</mml:mi></mml:math> Levels of Inconel 718

Application Of A Cohesive Zone Model For Simulating Fatigue Crack Growth From Moderate To High Delta K Levels Of Inconel 718

A New Cohesive Crack Tip Symplectic Analytical Singular Element Involving Plastic Zone Length for Fatigue Crack Growth Prediction under Variable Amplitude Cyclic Loading

Rate-dependent augmented finite element method for fast arbitrary crack growth

Modeling of Fatigue Crack Propagation

Numerical Study on High-Cycle Fatigue Crack Growth of Sinusoidal Interface Based on Cyclic Cohesive Zone Model

A rate-dependent cohesive zone model with the effects of interfacial viscoelasticity and progressive damage

Assessment of low cycle fatigue crack growth under mixed-mode loading conditions by using a cohesive zone model

A Discrete Element Model for Damage and Fatigue Crack Growth of Quasi-Brittle Materials

Cyclic cohesive zone model damage parameter acquisition for fatigue crack growth considering crack closure effect

A phase field modeling approach of cyclic fatigue crack growth

Computational Boundary Layer Approaches for Fatigue Crack Propagation under Mixed‐mode Loading Conditions

A Modified Cyclic Cohesive Zone Model for Low-Cycle Fatigue Crack Initiation Prediction for Subsea Pipelines under Mode I Loading

Fatigue Crack Propagation in Heterogeneous Materials under Remote Cyclic Loading

Low Cycle Fatigue Damage Model and Sensitivity Analysis of Fatigue Crack Initiation by Finite Element Approach

A Whole-Rate-Region Fatigue Crack Growth Model Incorporating Nonlinear Rate Evolution Characteristics Based on a Peridynamic Approach

Numerical Simulation and Experimental Studies on Elastic-Plastic Fatigue Crack Growth