Abstract:The cohesive zone model has been applied in different computational fracture mechanical investigations. However, effects of the cohesive law on crack simulation results have not been systematically and quantitatively studied. To quantify the influence of the cohesive law, a special cohesive element has been developed and implemented into the commercial FEM code ABAQUS. The detailed computational investigation of compact tension (CT) specimens confirms that the load vs. load line displacement curve hardly depends on the initial cohesive stiffness of the cohesive zone, but the fracture parameters, such as delta(5), may deviate up to 5%. A significant difference is observed in prediction of crack propagation, which exceeds 35% for a given load line displacement in CT specimens. To diminish artificial influence of the cohesive zone model, one has to increase the specific cohesive stiffness. The J-integral as the critical energy release rate generally differs from the cohesive energy. The elastic unloading and plastic reloading around the cohesive zone affect the fracture energy amount. The difference between the cohesive energy and the critical energy release rate depends on the cohesive law as well as the ductility of the material, vanishes only in an elastic specimen and exceeds 40% for ductile materials. The discrepancy between J and the cohesive energy grows and is stagnated for the cohesive strength larger by three times the initial yield stress. To obtain realistic computational results by using cohesive zone models, one has to build the cohesive law with proper parameters. (C) 2014 Elsevier Ltd. All rights reserved.

Cohesive Zone Modeling for 3D Ductile Crack Propagation

Towards Fully Automatic Modelling of the Fracture Process in Quasi-Brittle and Ductile Materials: a Unified Crack Growth Criterion

A Cohesive Model-Based Nonlinear Discontinuous Deformation Analysis for Tensile Fracture in Geotechnical Materials

Critical Remarks to Cohesive Zone Modeling for Three-Dimensional Elastoplastic Fatigue Crack Propagation

Effects of the Cohesive Law on Ductile Crack Propagation Simulation by Using Cohesive Zone Models

CRACK PROPAGATION IN POLYCRYSTALLINE ELASTIC-VISCOPLASTIC MATERIALS USING COHESIVE ZONE MODELS

Progress in Complex 2d and 3d Cohesive Fracture Modelling Considering Random Heterogeneity

Cohesive zone modelling of low cycle fatigue cracks in cracked and notched specimens

A Generalized Ductile Phase Field Model for Fracture Behavior of Three-Dimensional Metal Structures

Finite Element Modelling of Complex 3D Static and Dynamic Crack Propagation by Embedding Cohesive Elements in Abaqus

Application of Cohesive Zone Model in Crack Propagation Analysis in Multiphase Composite Materials

Computer-Simulation of Fracture Initiation and Crack-Propagation of Tpb Specimens

Improved Discontinuous Deformation Analysis Method for Modeling Tensile Cracking in Quasi-Brittle Materials

Verification Of A Cohesive Zone Model For Ductile Fracture

Fracture energy and tensile strength depending on stress triaxiality along a running crack front in three-dimensional cohesive modeling

Monte Carlo Simulation of Complex Cohesive Fracture in Random Heterogeneous Quasi-Brittle Materials: A 3D Study

Recent Advances in Cohesive Zone Modelling of Fracture

Prediction of Low Cycle Fatigue Crack Growth under Mixed-mode Loading Conditions Using Cohesive Zone Models

A Cohesive Zone Model for Self-Similar Fractal Crack Propagation

Three-Dimensional Cohesive Zone Modeling on Interface Crack Initiation from Nanoscale Stress Concentration

Gurson-Cohesive Modeling (GCM) for 3D Ductile Fracture Simulation