Phase-field modeling of coupled spall and adiabatic shear banding and simulation of complex cracks in ductile metals
Hao Zhang,Hui Peng,Ping Li,Yi Li,Hai Liu,Xiao-yang Pei,Jian-ying Wu,Tie-gang Tang,Ling-cang Cai
DOI: https://doi.org/10.1016/j.jmps.2022.105186
IF: 5.582
2022-12-22
Journal of the Mechanics and Physics of Solids
Abstract:In this work, a unified phase field theory for two coupled fracture types is proposed. Compared with the existing unified phase field theory for single fracture type, it considers the coupling behavior between different fracture types and is consistent with the single fracture type theory when one type of fracture is suppressed. Based on a new form of energy decomposition, that is, the strain energy is decomposed into deviatoric, tensile volumetric and compressive volumetric parts, and specifying the driving energy for each fracture type, a double phase-field model for coupled spall and adiabatic shear banding, which are two kinds of typical dynamic ductile fracture, is realized with the proposed unified phase field theory for two coupled fracture types. This coupled model can be used to predict the potential spall and adiabatic shear banding failures in ductile metals under dynamic loading, revealing the corresponding fracture types under different loadings without any additional criteria. The entire damage and fracture evolution (that is, from damage evolution, through crack expansion, and to fragmentation) are captured with this unified phase-field modeling framework. In addition, as an advantage of the double phase-field model, the complex multicrack distributions of spall and adiabatic shear bands in ductile metals can be presented with the proposed model. Based on these features, the expanding characteristics of complex cracks in metallic expanding shells are numerically studied. It is found that, if multilayer spall occurs, the specimen tends to fracture into three layers, that is, a complete spall layer, fragmentations in multilayer areas, and the main body, which is consistent with the experimental observations under certain conditions and is not the regular multiple layers predicted by the multilayer spall theory with ideal material assumption. For multiple adiabatic shear bands (ASBs) in the shell, the spiral patterns of ASBs' distributions, the initial positions, and the propagating path are clarified for the collapsed and expanding shells. The collapsed shell tends to form a single-direction spiral pattern whereas the expanding shell tends to form a double-direction spiral pattern. In addition to the inner surface, the intersection points of two ASBs can initiate cracks, and, as the intersection points have the chance of being distributed on the outer surface, the expanding shell has a greater potential to initiate a crack on the outer surface than the collapsed shell. The propagating path will be deflected after interactions of two ASBs, and the quantitative relationship between the deflection angle and the stress state before the interactions is given, which explains why the deflection angle is significantly larger in the collapsed shell compared with that in the expanding shell. Based on the above results and analysis, four typical stages of fractures in the expanding shell under internal explosive loading are identified.
mechanics,materials science, multidisciplinary,physics, condensed matter