Abstract:The cohesive model as an effective tool is capable of analyzing the size effect, progressive failure process, and the influence of the crack on concrete structures. Basic concept and definition of concrete cohesive model in the light of fracture process zone (FPZ) are introduced. The common methods used for the softening characterization of the concrete are then summarized, and they are primarily based on the following approaches: direct tensile tests of notched samples, J-integral approach, fracture energy and toughness, inverse approach, and R-curve method. As an application of cohesive model, the cohesive failure modeling and simulation of concrete beams under Mode-I, mixed-mode, and fatigue loading are illustrated. The size effect based on concrete cohesive model is discussed. Comparisons of the cohesive model with other two models (i.e., crack zone strip model and crack bridging model) are discussed in detail. Limitations of cohesive model in engineering applications are pointed out, and they may summarized as follows: (1) The cohesive model is primarily suitable for the crack under one dominant tensile stress; while the actual situation is under multiple stresses (e.g., the compressive stress may have an effect on cohesive failure). (2) Most of cohesive model assumes that the crack line is straight and the dissipation energy focuses near the crack tip. In fact, both the fracture surface (not necessarily along a straight crack line) and base materials have a pronounced effect on the fracture energy and cohesive failure. (3) Conventional cohesive model assumes that the nonlinearity (softening) only exists in the crack tip region where the stress reaches the limiting stress and the separation of material under tensile Mode-I loading occurs. Thus, the cohesive zone is referred to the area surrounding the crack tip, and the material outside this zone is taken as linear elastic. (4) Non-local behavior of cohesive model should be considered. (5) Effect of nonlinear stress on cohesive model should be further studied. To promote research and development of the cohesive model in concrete, the following aspects should be further investigated: (1) detection of crack initiation and softening under 3-D stresses; (2) mixed mode fracture mode under large shear deformation; (3) time dependent behavior of crack propagation and related material changes due to crack; (4) the stress-strain constitutive relationship for nonlinear base materials; (5) effects of cyclic loading history and order, cyclic loading frequency and magnitude, size, and fatigue life on the cohesive model.

Cohesive Models for Anti-Plane Mode Fracture in Dissimilar Structures: Effect of Small/Large Scale Yielding Conditions on Computed Fracture Load

Cohesive Cracking Simulation of Concrete Using Effective Modulus

Progress in Complex 2d and 3d Cohesive Fracture Modelling Considering Random Heterogeneity

Effects of the Cohesive Law on Ductile Crack Propagation Simulation by Using Cohesive Zone Models

Nonlinear Fracture Analysis of Delamination Crack Jumps in Laminated Composites

Monte Carlo Simulation of Complex Cohesive Fracture in Random Heterogeneous Quasi-Brittle Materials: A 3D Study

Finite Element Modelling of Complex 3D Static and Dynamic Crack Propagation by Embedding Cohesive Elements in Abaqus

Comparative Studies of the Constitutive Models for the Cohesive Interface Cracks of Quasi-Brittle Materials

Verification Of A Cohesive Zone Model For Ductile Fracture

A Bi-Linear Cohesive Law-Based Model for Mode II Fracture Analysis: Application to ENF Test for Unidirectional Fibrous Composites

A Thermodynamically Consistent Cohesive Zone Model for Mixed-Mode Fracture

ADVANCES IN CONCRETE COHESIVE CRACK MODELS

Discrete Cohesive Zone Model for Mixed-Mode Fracture Using Finite Element Analysis

Failure Characterization of Solid Structures Based on an Equivalence of Cohesive Zone Model

A Novel Cohesive Interlayer Model Considering Friction

Fracture and Multiple-Cracking Modelling of Strain-Hardening Cementitious Composites

A Nonlinear Friction-Cohesive Model for Characterizing Mode II Fracture of Laminated Composites

In-Plane fracture of laminated fiber reinforced composites with varying fracture resistance: experimental observations and numerical crack propagation simulations

An embedded cohesive crack model for finite element analysis of mixed mode fracture of concrete

Block structured adaptive mesh refinement and strong form elasticity approach to phase field fracture with applications to delamination, crack branching and crack deflection

A Novel XFEM Cohesive Fracture Framework for Modeling Nonlocal Slip in Randomly Discrete Fiber Reinforced Cementitious Composites