Abstract:This study develops a method coupling the finite element method (FEM) and the scaled boundary finite element method (SBFEM) for fully-automatic modelling of cohesive crack growth in quasi-brittle materials. The simple linear elastic fracture mechanics (LEFM)-based remeshing procedure developed previously is augmented by inserting nonlinear interface finite elements automatically. The constitutive law of these elements is modelled by the cohesive/fictitious crack model to simulate the fracture process zone, while the elastic bulk material is modelled by the SBFEM. The resultant nonlinear equation system is solved by a local arc-length controlled solver. The crack is assumed to grow when the mode-I stress intensity factor KI vanishes in the direction determined by LEFM criteria. Other salient algorithms associated with the SBFEM, such as mapping state variables after remeshing and calculating KI using a “shadow subdomain”, are also described. Two concrete beams subjected to mode-I and mixed-mode fracture respectively are modelled to validate the new method. The results show that this SBFEM–FEM coupled method is capable of fully-automatically predicting both satisfactory crack trajectories and accurate load–displacement relations with a small number of degrees of freedom, even for problems with strong snap-back. Parametric studies were carried out on the crack incremental length, the concrete tensile strength, and the mode-I and mode-II fracture energies. It is found that the KI⩾0 criterion is objective with respect to the crack incremental length.

A cohesive model for the rupture of concrete by low‐cycle fatigue

Cohesive Cracking Simulation of Concrete Using Effective Modulus

Modeling Cyclic Crack Propagation in Concrete Using the Scaled Boundary Finite Element Method Coupled with the Cumulative Damage-Plasticity Constitutive Law

Prediction of Low Cycle Fatigue Crack Growth under Mixed-mode Loading Conditions Using Cohesive Zone Models

Damage Based Constitutive Model for Predicting the Performance Degradation of Concrete

An embedded cohesive crack model for finite element analysis of mixed mode fracture of concrete

Assessment of low cycle fatigue crack growth under mixed-mode loading conditions by using a cohesive zone model

A Mesoscale Modelling Approach Coupling SBFEM, Continuous Damage Phase-Field Model and Discrete Cohesive Crack Model for Concrete Fracture

Numerical Analysis of High and Low‐cycle Flexural Fatigue for Reinforced Concrete Beams under Full‐range of Varying Amplitudes

A fracture energy–based viscoelastic–viscoplastic–anisotropic damage model for rate-dependent cracking of concrete

A Numerical Study of Crack Mixed Mode Model in Concrete Material Subjected to Cyclic Loading

Progress in Complex 2d and 3d Cohesive Fracture Modelling Considering Random Heterogeneity

A Damage Model of Concrete including Hysteretic Effect under Cyclic Loading

Monte Carlo simulation of complex cohesive fracture in random heterogeneous quasi-brittle materials

Towards Fully Automatic Modelling of the Fracture Process in Quasi-Brittle and Ductile Materials: a Unified Crack Growth Criterion

Plastic-Damage Model for Cyclic Loading of Concrete Structures

Damage constitutive of concrete under uniaxial alternate tension?compression fatigue loading based on double bounding surfaces

Damage Degradation of Concrete Due to Compressive Fatigue Loading

Rate dependent cohesive zone model for fatigue crack growth

Fully-automatic Modelling of Cohesive Crack Growth Using a Finite Element–scaled Boundary Finite Element Coupled Method

An embedded crack model for finite element analysis of concrete fracture