Abstract:Accurate assessment of fracture behavior and life prediction of cracked materials based on the mixed mode fracture criteria is of utmost importance in fracture mechanics. In this study, the modified fracture criteria incorporating T-stress for mixed mode I-II cracks were comprehensively reviewed. Additionally, a comparative analysis was conducted between the experimental results obtained from five different cracked configurations and the theoretical predictions according to these modified criteria. Moreover, a brief discussion was held regarding the effect of T-stress on both crack initiation angle and fracture toughness, accompanied by providing some suggestions. The results revealed that the predictive accuracy of modified criteria exhibited noticeable variations across different cracked configurations due to the significant disparities in both the sign and magnitude of T-stress around the crack tip. However, it was observed that the predicted curves based on the modified fracture criteria for the semi-circular bend and edge-crack triangular specimens had remarkable similarities owing to their similar biaxial stress ratio B. When the mode II loading dominated, the generalized maximum tangential stress, generalized minimum strain energy density and generalized averaged strain energy density criteria were suitable for the semi-circular bend, edge-crack triangular, central crack rectangular and short bend beam specimens with positive T-stresses, whereas the maximum tangential strain, generalized maximum tangential stress and generalized maximum tangential strain energy density criteria could provide better theoretical predictions for central cracked Brazilian disk specimens having a negative T-stress.

Mixed-mode Fracture Criteria for the Materials with Different Yield Strengths in Tension and Compression

Numerical investigation of fracture behavior of nanostructured Cu with bimodal grain size distribution

Prediction of Mechanical Properties in Bimodal Nanotwinned Metals with a Composite Structure

Nonlinear Fracture Analysis of Delamination Crack Jumps in Laminated Composites

Towards Fully Automatic Modelling of the Fracture Process in Quasi-Brittle and Ductile Materials: a Unified Crack Growth Criterion

3D-generalized maximum tangential strain criterion for predicting mixed-mode I/II/III fracture initiation of brittle materials considering T-stress effects

A Plastic Zone Equation Based on Mean Yield Criterion

Study on Elastic Mixed Mode Fracture Behavior and II-III Coupling Effect

Progress in Complex 2d and 3d Cohesive Fracture Modelling Considering Random Heterogeneity

Application of modified fracture criteria incorporating T-stress for various cracked specimens under mixed mode I-II loading

MIXED MODE FRACTURE FOR LINEAR ELASTIC MATERIALS BASED ON STRAIN THEORY USED IN LOW PERMEABILITY RESERVOIRS

The Unified Limit Load Solution of Fiber-reinforced Concrete Cylinders Considering the Strain Softening of Material

Mixed-mode Fatigue Crack Growth Prediction in Biaxially Stretched Sheets

Effects of Surface Elasticity on Mixed-Mode Fracture

Modified nonlinear Mohr–Coulomb fracture criteria for isotropic materials and transversely isotropic UD composites

Stress based fracture criteria for mixed-mode I/II delamination of unidirectional composite laminates

A novel and simple variationally-consistent phase-field cohesive zone model for mixed-mode fracture

Applications of Normal Stress Dominated Cohesive Zone Models for Mixed-Mode Crack Simulation Based on Extended Finite Element Methods

Determination of Fracture Parameters in Center Cracked Circular Discs of Concrete under Diametral Loading: A Numerical Analysis and Experimental Results

A thermodynamically consistent phase field model for mixed-mode fracture in rock-like materials

Estimation of fracture behavior of CFRP/CFRP adhesively bonded joints under mixed-mode conditions using a cohesive zone model