Abstract:Recently, carbon nanotube field-effect transistors (CNTFETs) have garnered significant attention from VLSI engineers due to their exceptional electrical properties. This paper proposes a novel high-speed, low-power eight-transistor (8 T) static random-access memory (SRAM) cell based on 32-nm CNTFET technology. The SRAM cell was simulated using the HSPICE tool with a V DD of 0.9 V. The high-speed and low-power characteristics of the SRAM design are attributed to the high subthreshold slope and high carrier mobility of metal-oxide-semiconductor field-effect transistor (MOSFET)-like CNTFETs utilized in the simulations. The implementation of dual threshold transistors, coupled with a transmission gate for bitline access, contributes to the enhanced performance. Key performance metrics such as noise margins, power consumption, delay, and SRAM electrical quality metric (SEQM) of the proposed SRAM have been evaluated and compared with existing CNTFET-based SRAM designs. The proposed cell demonstrates reductions of 73.73%, 43.18%, and 58.70% in read power, write power, and hold power, respectively, compared to the lowest respective power values of other examined SRAM designs. The proposed SRAM ranks second, third, and second in write static noise margin (WSNM), hold static noise margin (HSNM), and read static noise margin (RSNM), respectively, among other designs. Additionally, the proposed SRAM exhibits the least sensitivity to parametric variations compared to other designs. The SEQM, which provides a comprehensive assessment of access times, noise margins, and power usage for the SRAM cell, has been calculated. The SEQM of the proposed SRAM is 10.6, 1.89, 13.15, and 1.82 times higher than that of C6T, BLP8T, Mani's 10 T, and LP8T, respectively.

Design of 512-Kbit Synchronous High-speed SRAM

A 512 Kb SRAM in 65nm CMOS with Divided Bitline and Novel Two-Stage Sensing Technique

Low-Power Design of High-Performance SRAM

Design of High-Speed SRAM Array and Peripheral Circuits for Compiler

Bit-Interleaving-Enabled 8t Sram with Shared Data-Aware Write and Reference-Based Sense Amplifier

A 16kbyte SRAM Memory Containing Peripheral Circuit Hardened

Design of High Performance SRAM Based on Single-Port Sense Amplifier

A 0.2 V-1.8 V 8T SRAM with Bit-interleaving Capability.

High Noise Margin 12T Subthreshold SRAM Cell with Enhanced Read Speed and Eliminated Half-Selected Problem

An Ultra-Low-Voltage Bit-Interleaved Synthesizable 13T SRAM Circuit.

-Memory Computing Based Reliable and High Speed Schmitt trigger 10T SRAM cell design

A High Performance Embedded Sram Compiler

An Ultra-Low-power 1 Kb Sub-Threshold SRAM in the 180 Nm CMOS Process

A Sub-200mV 6T SRAM in 0.13μm CMOS

A Design of Subthreshold SRAM Cell Based on RSCE and RNCE.

A 390-mm/sup 2/, 16-bank, 1-Gb DDR SDRAM with hybrid bitline architecture

Design analysis of a low-power, high-speed 8 T SRAM cell using dual-threshold CNTFETs

An Ultra-Dynamic Voltage Scalable (U-DVS) SRAM Design

The Design of Low-power Embeded SRAM for TFT-LCD Driver IC

Design of a Novel High Speed Embedded DRAM

Development of A Deep Submicrometer Embedded Sram Compiler