Abstract:As the core components of the power grid, the health condition of transformers directly affects the safe operation of the grid. Therefore, it is important to find effective methods to evaluate the internal early fault status of transformers. In order to clarify the characteristics of the physical parameters during the development of partial discharge of the inter-turn electrodes inside a transformer, we analyzed the differences between them and other partial discharge signal characteristics. Moreover, we established a research platform for the partial discharge characteristics of inter-turn electrodes in oil-paper insulation. The constant voltage is adopted in this series of tests. High voltage is applied on the inter-turn electrode specimens with different time length in different groups of tests. And we used high-frequency current coils, ultrasonic sensors, and ultra-high frequency sensors to synchronously measure various physical signals. The results indicate that the partial discharge of inter-turn electrodes can be divided into three stages: the initiation stage, the development stage, and the pre-breakdown stage. During the initiation stage, the conventional pulse current signals and ultra-high frequency signals appeared less frequently within one power frequency cycle. As the discharge progresses into the development stage, the discharge frequency increases rapidly, and the distribution of discharge points widens in phase. In the pre-breakdown stage, the discharge phase almost fills the entire power frequency cycle. The PRPD spectra of different physical signals during different experimental periods exhibit distinct morphological characteristics. Compared to traditional single detection methods, the comprehensive utilization of multiple physical signals enables a more accurate analysis of discharge characteristics. The present study analyzes the partial discharge characteristics of inter-turn electrode structures in oil-paper insulation, establishes a linkage between the discharge process and multiple physical signals, and provides data references and theoretical support for transformer condition assessment and early warning.

FUNDAMENTAL STUDIES AND APPLICATIONS ON DISCHARGE FAULTS DIAGNOSIS OF GENERATORS AND TRANSFORMERS

Partial Discharge Diagnosis for Transformer - One Step Toward Strong Smart Grid in China

Review of Partial Discharge Live Detection and Location Technology for Power Transformer

Study Of On-Line Monitoring Method Of Partial Discharge For Power Transformers Based On Rfct And Microstrip Antenna

DISTORTION CAUSED BY PARTIAL DISCHARGE PROPAGATION ALONG POWER TRANSFORMER WINDING

Partial Discharge Pulse Shape Detection and Analysis under DC Condition in Typical Defect Models

An overview of state-of-the-art partial discharge analysis techniques for condition monitoring

Detection and Identification Technologies of Wide Band Partial Discharge

Partial discharge theory and technologies related to medium-voltage electrical equipment

Analysis of Multi-Physical Signal Characteristics of Inter-Turn Oil-Paper Insulation Partial Discharge

Study on waveform characteristics of partial discharge pulses in air

The Actuality and Perspective of Partial Discharge Detection Techniques

Correlation of Partial Discharge Pulse Signals in Transformer Windings to Locate Discharge Locations

Analysis Of The Intrinsic Characteristics Of The Partial Discharge Induced By Typical Defects In Gis

On-line and on-site PD monitoring and diagnosis of power transformer

Partial discharges and diagnostics of high-voltage equipment

Study on the Influence of Pulse Propagation in Transformer Winding on Partial Discharge Pattern Recognition

Analysis on Partial Discharge Signal in the Generator

On-line Partial Discharge Monitoring and Diagnostic System

Research on the Typical Partial Discharge Using the UHF Detection Method for GIS

THE STUDY ON MEASURING TECHNIQUE OF PARTIAL DISCHARGE IN GAS INSULATED SWITCHGEAR USING ULTRA HIGH FREQUENCY METHOD WITH EXTERNAL SENSORS