Abstract:For the partial discharge test of electrical equipment with large capacitance,the use of lowfrequency voltage instead of power frequency voltage can effectively reduce the capacity requirements of test power supply.However,the validity of PD test under low frequency voltage needs to be evaluated.In order to investigate the influence of voltage frequency on corona discharge in the air,the discharge test of the tip-plate electrode under the frequency from 50 to0.1 Hz is carried out based on the impulse current method.The results show that some of the main features of corona under low frequency do not change.The magnitude of discharge in a positive half cycle is obviously larger than that in a negative cycle.The magnitude of discharge and interval in positive cycle are random,while that in negative cycle are regular.With the decrease of frequency,the inception voltage increases.The variation trend of maximum and average magnitude and repetition rate of the discharge in positive and negative half cycle with the variation of voltage frequency and magnitude is demonstrated,with discussion and interpretation from the aspects of space charge transportation,effective discharge time and transition of discharge modes.There is an obvious difference in the phase resolved pattern of partial discharge and characteristic parameters of discharge patterns between power and low frequency.The experimental results can be the reference for mode identification of partial discharge under low frequency tests.The trend of the measured parameters with the variation of frequency provides more information about the insulation defect than traditional measurements under a single frequency（usually 50 Hz）.Also it helps to understand the mechanism of corona discharge with an explanation of the characteristics under different frequencies.

Study on waveform characteristics of partial discharge pulses in air

Partial discharge diagnosis by simultaneous observation of discharge pulses and vibration signal

TYPICAL PULSE SHAPE AND FREQUENCY CHARACTERISTIC OF THE PD SIGNAL IN OIL-PAPER INSULATION

Detection and Identification Technologies of Wide Band Partial Discharge

Wavelet transform applying in partial discharge measurement

Relationship Between Time-Frequency Representation of PD-induced UHF Signal and PD Current Pulse

Suppression of Pulse Interference in Partial Discharge Measurement Based on Phase Correlation and Waveform Characteristics

Study on pulse current of typical PD models in power transformer

Study on the Influence of Pulse Propagation in Transformer Winding on Partial Discharge Pattern Recognition

Characteristics and Mechanism of Partial Discharge Behavior of Power Module Under Unipolar Square Voltage

FUNDAMENTAL STUDIES AND APPLICATIONS ON DISCHARGE FAULTS DIAGNOSIS OF GENERATORS AND TRANSFORMERS

Research on the Typical Partial Discharge Using the UHF Detection Method for GIS

Analysis Of The Intrinsic Characteristics Of The Partial Discharge Induced By Typical Defects In Gis

Development and Application of DC Partial Discharge Test System

Review on Detection and Analysis of Partial Discharge along Power Cables

Analysis and Rejection of Noises from Partial Discharge (PD) On-Site Testing Environment

Partial discharge theory and technologies related to medium-voltage electrical equipment

Characterization and Comprehension of Corona Partial Discharge in Air under Power Frequency to Very Low Frequency Voltage

Propagation Characteristics of Partial Discharge Pulses in the Cable

Feature Extraction And Comprehension Of Partial Discharge Characteristics In Transformer Oil From Rated Ac Frequency To Very Low Frequency