Abstract:Solid–liquid mixing has been a common industrial process operation. The measurement of solid–liquid mixing quality can help improve the efficiency of related industrial processes, but there is still a lack of an intuitive, accurate, and simple measurement method. As an important indicator to evaluate the solid–liquid mixing quality, the degree of solid suspension and the uniformity of solid distribution are directly related to mass transfer and reaction efficiency. Therefore, it is necessary to study the solid suspension and distribution in a solid–liquid system. In this work, the solid suspension and distribution of a solid–liquid system composed of glass beads–water stirred by the impeller are studied experimentally via digital image processing combined with statistical analysis. Specifically, images of solid–liquid mixing are first obtained using a camera and digitally processed. The area ratio of the solid in the image is proposed to reflect the degree of solid suspension, and the modified L 2 -star discrepancy ( MD ) is then used to quantify the uniformity of the solid distribution. Then, the solid–liquid mixing quality can be characterized by combining the area ratio and solid distribution. The feasibility of this method was proved by qualitative analysis of the solid–liquid mixing state and comparison with known studies. In addition, the effects of various stirring factors on the solid distribution were studied and discussed by using the proposed method. The results show that the method proposed in this paper can measure the quality of the solid–liquid mixing state more directly and is effective and accurate. Furthermore, it was used to find the best experimental parameters in this work. This method is also simpler and cheaper than many other methods. It is of great significance to improve the efficiency of chemical and metallurgical and other industrial processes.

A Quantitative Measurement System Focusing on Liquid-Solid Contact in the Feed Stock Zone of a Downer

Influence of Operating Conditions on Liquid-Solid Contact in the Feed Stock Zone of a Downer

Experimental and Numerical Study of Solids Concentration Distribution in Transition Section of Turbulent Fluidized Bed

MEASUREMENT OF THE AMOUNT OF COKE DEPOSIT ON CATALYST BASED ON ACOUSTIC EMISSION FREQUENCY SHIFT

Hydrodynamics and Heat Transfer in a Fluidized Bed with Liquid Spray: Particle Color-Change Based Measurement and Modelling

CFD-DEM Simulation of Flow and Mixing Behavior in Downers with Different Entrance Structures

Numerical Simulation of Hydrodynamics in Downers Using a CFD–DEM Coupled Approach

Quantitative Measurement of Solids Holdup for Group A and B Particles Using Images and Its Application in Fluidized Bed Reactors

Measurement of solid–liquid mixing quality by using a uniform design method based on image analysis

An Experimental Study of Immiscible Liquid–liquid Dispersions in a Pump–mixer of Mixer–settler

A New Measurement Method for Mixing and Segregation of Binary Mixture by Combining Gas Cutting-off Method and ECVT

Experiment on Screw Feeder at the Inlet of a Downer

Hydrodynamics and mixing behaviour in entrance of downer

A simple color concentration measurement technique for powders

Cocurrent gas-solid downflow fluidized bed (downer) reactors: (III). Gas and solid mixing

An Efficient Measure for Controlling Pollution in the Dye Industry: Experimental and DFT Investigations on Direct Determination of 3-(N,n-diethylamino)acetanilide

RADIAL DISTRIBUTION CHARACTERISTICS OF LOCAL PARTICLE VELOCITY FOR BINARY PARTICLE MIXTURE IN DOWNERS

Physical simulation of mixing on a C–H2 smelting reduction reactor with different tracer feeding positions

Study on Radial Solid-Fraction Profiles in Large-Scale Downer Reactor

Liquid-Solid Mass Transfer of Catalyst in a Reactive Distillation Column with Different Packing Method