Abstract:The gas-solid flows in a two-dimensional downer of 10 m in height and 0.10 m in width were simulated using a CFD-DEM method, where the motion of particles was modeled by discrete element method (DEM) and the gas flow was described by Navier-Stokes equations. The simulations revealed a rich variety of developing flow structures in the downer under different operating conditions. The two-phase flow development can be clearly characterized by the micro-scale particle distributions in the downer. Near the inlet, the particle distribution is dominated by the distributor design. Then, the particles disperse in the column, forming a homogeneous transit region. After that clusters start to form and modulate the gas-solid flow field till the fully-developed state. The particle-scale simulation disclosed that the clusters are composed of loosely collected particles, and these particles have the same flow direction as the bulk flow so that no particle backmixing can be observed. As the particles in the downer have the tendency to maintain the inertia, the capability of lateral transfer of particles is relatively weak, which was illustrated by tracking the movement of the single particles and clusters. The simulations of the inlet effect on the hydrodynamics in the downer showed that the gas-solid flow structure and the mixing behavior are sensitive to the inlet design. An inappropriate design or operation would probably cause the undesired flow phenomena such as the wide distribution of residence times. The time-averaged hydrodynamics based on the transient simulations showed good agreement with the experimental findings in the literature. The simulation based on the CFD-DEM coupled approach provides a theoretical way to comprehensively understand the physics at micro- to macro-scales in the co-currently downward gas-solid flows. (c) 2009 Elsevier B.V. All rights reserved.

RADIAL DISTRIBUTION CHARACTERISTICS OF LOCAL PARTICLE VELOCITY FOR BINARY PARTICLE MIXTURE IN DOWNERS

Particle Velocity Measurements in Transition Section of Turbulent Fluidized Beds Using Optical Fiber Probe and CFD Simulation

Experimental and Numerical Study of Solids Concentration Distribution in Transition Section of Turbulent Fluidized Bed

Study on bubble size distribution and local gas holdup in bubble column

Particle Decelerating Regions in Turbulent Fluidized Bed

Study on Local Gas-Liquid Dispersion in Dual-Impeller Aerated Stirred Vessel

Radial Profiles of Particle Velocity in A Large Scale Cfb Downer

Experimental Investigation on Solid Particle Distribution in Dense Solid–liquid Stirred Tank

Experimental Study on the Distribution of Solid Particle Concentration in the Semi-Dry Flue Gas Desulfurization Reactor

Dispersion Trajectory and Dynamics of Particles Injected from the Sidewall in the Gas–Solid Fluidized Bed

DEM investigation of the axial dispersion behavior of a binary mixture in the rotating drum

Study on Radial Solid-Fraction Profiles in Large-Scale Downer Reactor

Estimation of Particle Dispersion Characteristics in a Fluidized Bed with the Binary Mixture of Geldart A and B Types Using the Optical Fiber Probe Method

Radial behavior in riser and downer during the FCC process

Radial Profiles of Solids Concentration and Velocity in a Very Fine Particle (36 Μm) Riser

Hydrodynamics and mixing behaviour in entrance of downer

Numerical Simulation of Hydrodynamics in Downers Using a CFD–DEM Coupled Approach

Solids Axial and Radial Mixing Behavior in Downer with Gas Jet in Reverse Direction

Experimental Quantification of the Radial Mixing of Binary Mixtures in Annular Fluidized Beds Using the Capacitance Probe Method

Axial Velocity Distribution Of Particle Along The Radial Direction In Dilute Phase Of Riser

Profiles of particle velocity and solids fraction in a high-density riser