Abstract:The zinc blend nonlinear crystal of zinc telluride (ZnTe) is currently one of the most commonly used electro-optical material for terahertz (THz) probe and imaging. We report herein how to engineer the surface behavior of a ZnTe single crystal to design subwavelength structures (SWSs) for enhancing ultrabroadband transmission. Polystyrene (PS) nanoparticle monolayers with a maximum coverage of 85.2% were produced on the ZnTe crystal by an eccentric spin-coating technique combined with surface wettability engineering. Subsequently, the well-defined conical SWS arrays were fabricated on the ZnTe crystal by reactive ion etching over the PS monolayer template, with the size of the SWS arrays customized by optimizing the etching process. Finally, we demonstrated ultrabroadband antireflection on the surface structured ZnTe crystals in the visible-near-infrared, infrared, and terahertz regions with transmittance increase of 11.6%, 10.0%, and 24.8%, which are attributed to the decrease of surface Fresnel reflection by SWS. Notably, in 0.2–1.0 THz, the transmittance reached over 70%. Our work provides a new strategy to enhance the THz generation efficiency and detection sensitivity based on ZnTe crystals by surface engineering.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c22772?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c22772</a>.Details of the specific results under different parameters, self-assemble process, pre-etching process, schematic of SWS formation process, the THz time domain and frequency domain under 140 W RF power and transmittance under 170 W RF power (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c22772/suppl_file/am0c22772_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Effects of Dry Etching Processes on Effective Refractive Index of ZnTe Surface Layers in Terahertz Region

Effects of dry etching processes on optical properties of ZnTe surface layers in ultraviolet region

Generation and Detection of Terahertz Radiation on Reactive Ion Etched Znte Surfaces

Influence of Reactive Ion Etching on Thz Transmission and Reflection Properties of Nicr Film Deposited on A Dielectric Substrate

ZrO2-TiO2 thin films: A new material system for mid-infrared integrated photonics

Effect of Ar+ Ion Etching Treatment on the Surface Work Function of Hg3In2Te6 Wafer

Enhanced Transmission from Visible to Terahertz in ZnTe Crystals with Scalable Subwavelength Structures

CHF 3 /O 2 -Based Plasma Reactive Ion Etching of GeTe for Nonvolatile Phase Change Memory

A Systematic Study on Dry Etching Process of Germanium for Ge 3D-Fets Applications

A Study Of Hg1-Xcdxte Surfaces Processed Using Inductively Coupled Plasma With Ch4/H-2/N-2/Ar Mixture

Electron-cyclotron-resonance plasma etching of the ZnO layers grown by molecular-beam epitaxy

Quality improvement of ZnTe crystals by annealing in In and Zn vapor

Antireflection microstructures on ZnSe for mid- and far-IR fabricated by femtosecond laser ablation assisted with wet chemical etching

Precise Measurement of Refractive Index in the Ambient Environment Using Continuous-Wave Terahertz Frequency-Domain Spectroscopy (Thz-Fds)

Terahertz Transmission Properties of Transparent Conducting Molybdenum-Doped Zno Films

Carrier Concentration Dependence of Terahertz Transmission on Conducting ZnO Films

Characteristics of Several Common Optical Materials in Ion Beam Etching

Reactive Ion Beam Etching of Hfo2 Film Using Ar/Chf3 Gas Chemistries

Influence of Thickness of Al-Doped ZnO Films as Broadband Antireflection Coating on Teraherz Transmission

Dry Etching Of New Phase-Change Material Al1.3sb3te In Cf4/Ar Plasma

Study of Optical and Dielectric Properties of Annealed ZnO Nanoparticles in the Terahertz Regime