Abstract:Ti3SiC2, as one of the most typical MAX ceramics, has been extensively studied as a potential high-temperature structural material. However, the restrictive relations between strength and toughness of Ti3SiC2 and Ti3SiC2-based materials have hampered their industrial applications. Herein, we reported the successful fabrication of Ti3SiC2–(Ti3SiC2–Cf) functionally graded materials (FGM) via hot-press sintering Ti3SiC2 and short Cf-derived preceramic papers. The microstructure evolution as well as the effect of sintering temperature on phase composition and interfacial reaction were investigated. Flexural strength and fracture toughness from ambient temperature to 1000 °C of the graded composites were determined to evaluate the mechanical performance. The results have shown that chemical reactions occurred between carbon fibers and Ti3SiC2 matrix, which leads to the formation of SiC interfaces with strong covalent bonds. The newly developed Ti3SiC2–(Ti3SiC2–Cf) graded composite materials exhibited excellent comprehensive performance as compared to that of monolithic Ti3SiC2. The flexural strength and fracture toughness of the graded composite at room temperature can be reached to 526 MPa and 7.46 MPa m1/2, respectively. However, there is no significant change in flexural strength and fracture toughness from RT to 1000 °C. The fracture micrographs also reveal that fiber breaking、pulling out and debonding are the primary mechanisms that contribute to the superior mechanical properties of composites. The exceptional performance demonstrated in Ti3SiC2–(Ti3SiC2–Cf) graded materials also makes them attractive choices for a variety of heatproof devices in aerospace sectors.

Fabrication and properties of TiC/Ti3SiC2 composites and FGMs

Fabrication and Properties of TiC/Ti<sub>3</sub>SiC<sub>2</sub> Composites and FGMs

A strong, machinable, and multifunctional Ti3SiC2-(Ti3SiC2-Cf) composite: Gradient architecture and mechanical properties

Preparation and characterization of Al2O3–Ti3SiC2 composites and its functionally graded materials

Fabrication and characteristics of plasma facing SiC/C functionally graded composite material

Fabrication and evaluation of SiC/C functionally graded material

Fabrication Of Sic/Cu Functionally Gradient Material By Graded Sintering

A Novel Functionally Graded Material in the Ti–Si–C System

The study of mechanical properties of Ti3SiC2/Y TZP ceramics composites

The fabrication and mechanical properties of Ti3SiC2/HAp ceramics composites

Synthesis, fabrication, and applications of Ti3SiC2/SiC ceramics: a review

Fabrication and evaluation of SiC/Cu functionally graded material used for plasma facing components in a fusion reactor

Microstructure and mechanical properties of TiC-Ni functionally graded materials by simultaneous combustion synthesis and compaction

Investigation of the physical and mechanical properties of hot-pressed machinable Si3N4/h-BN composites and FGM

Microstructure and mechanical properties of short-carbon-fiber/Ti3SiC2 composites

Machinable and mechanical properties of sintered Al 2 O 3 -Ti 3 SiC 2 composites

Synthesis and Mechanical Properties of In-Situ Hot-Pressed Ti3SiC2 Polycrystals

Fabrication and mechanical evaluation of SiC–TiC nanocomposites by SPS

Freeform Fabrication of Ti3SiC2 Powder-Based Structures

Densification, Microstructure and Mechanical Performance of TiC/Fe Composites by Spark Plasma Sintering

Synthesis and Properties of Ti<sub>3</sub>SiC<sub>2</sub>/SiC Ceramic Composites