Abstract:Ti3SiC2, as one of the most typical MAX ceramics, has been extensively studied as a potential high-temperature structural material. However, the restrictive relations between strength and toughness of Ti3SiC2 and Ti3SiC2-based materials have hampered their industrial applications. Herein, we reported the successful fabrication of Ti3SiC2–(Ti3SiC2–Cf) functionally graded materials (FGM) via hot-press sintering Ti3SiC2 and short Cf-derived preceramic papers. The microstructure evolution as well as the effect of sintering temperature on phase composition and interfacial reaction were investigated. Flexural strength and fracture toughness from ambient temperature to 1000 °C of the graded composites were determined to evaluate the mechanical performance. The results have shown that chemical reactions occurred between carbon fibers and Ti3SiC2 matrix, which leads to the formation of SiC interfaces with strong covalent bonds. The newly developed Ti3SiC2–(Ti3SiC2–Cf) graded composite materials exhibited excellent comprehensive performance as compared to that of monolithic Ti3SiC2. The flexural strength and fracture toughness of the graded composite at room temperature can be reached to 526 MPa and 7.46 MPa m1/2, respectively. However, there is no significant change in flexural strength and fracture toughness from RT to 1000 °C. The fracture micrographs also reveal that fiber breaking、pulling out and debonding are the primary mechanisms that contribute to the superior mechanical properties of composites. The exceptional performance demonstrated in Ti3SiC2–(Ti3SiC2–Cf) graded materials also makes them attractive choices for a variety of heatproof devices in aerospace sectors.

Preparation and characterization of Al2O3–Ti3SiC2 composites and its functionally graded materials

Fabrication and properties of TiC/Ti3SiC2 composites and FGMs

Synthesis of Functionally Graded AA7075-B4C Composite with Multi-Level Gradient Structure

A Novel Functionally Graded Material in the Ti–Si–C System

Fabrication of Al2O3–Ti3SiC2 Composites and Mechanical Properties Evaluation

Fabrication and Properties of TiC/Ti<sub>3</sub>SiC<sub>2</sub> Composites and FGMs

Microstructure and Mechanical Properties of Ti60-Ti2alnb Functionally Graded Materials Fabricated by Laser Directed Energy Deposition

A strong, machinable, and multifunctional Ti3SiC2-(Ti3SiC2-Cf) composite: Gradient architecture and mechanical properties

Combustion synthesis TiC-Al2O3/Fe FGM and its resisting thermal shock behaviors

Effects of TiB2 content and gradient structure on microstructural characterization and mechanical properties of TiB2/Al7050 composites

Composition design and mechanical properties of B 4 C/Al-Zn-Mg-Cu functionally graded materials prepared by laser additive manufacturing

Mechanical Properties and Microstructure of Al<sub>2</sub>O<sub>3</sub>-Ti<sub>3</sub>SiC<sub>2</sub> Ceramic Composites

Microstructure and mechanical properties of TiC-Ni functionally graded materials by simultaneous combustion synthesis and compaction

Microstructure evolution, property analysis, and interface study of 3%CF-3%SiC-10%SiC functional gradient aluminum matrix composites

Preparation and toughness mechanism of in-situ Ti3AlC2 enhanced and toughened TiAl3 matrix composites

Fabrication and properties of machinable Al2O3/LaPO4 composites and FGMs

Microstructure and resisting thermal shock behaviors of TiC-Al2O3/Fe functionally graded materials prepared by SHS/PHIP

Thermal Shock Behavior of a Novel TiCx–Ni3(Al,Ti)/Ni Functionally Graded Composite

Microstructure and mechanical properties of Al2O 3/TiAl in situ composites doped with Fe2O3

Effect of Composition on Properties of Alumina/Titanium Silicon Carbide Composites

Design and Fabrication of Machinable Al<sub>2</sub>O<sub>3</sub>/h-BN Composites and FGMs