Abstract:Composite insulators have been widely used for its excellent flashover endurance capability, but the umbrella of standard composite insulators are easily been bridged in icing condition. Flashover problems caused by icing insulator have a serious threat to the safe operation of transmission lines,. It is the key technologies for the safe operation of power system which should be solved as soon as possible. The influence of two types of composite insulator umbrella structure (common type and anti-ice type) on iced AC flashover voltage characteristics in the same structure length, as well as same artificial pollution and artificial icing test conditions, but also the method of artificial iced flashover test on composite insulator were introduced. Iced flashover test results showed that the ice bridge formation could be prevented or extended if the umbrella structure design of anti-ice-type composite insulators was more reasonable. For the 750kV composite insulator under the same conditions of artificial pollution test (SDD/NSDD=0.08/0.48mg/cm2) and artificial icing test (when icing water converted to 20 °C, the conductivity is 100μS/cm and the iced thickness from 15mm), it is shown that AC iced flashover voltage of Anti-ice type increased 12%~28% than common type. Upon the existent theoretical and experimental results and based on a great of laboratory investigations carried out in environment laboratory of China UHV AC test base, for the first time this paper studies systematically the insulators shed optimization which will contribute to the designation for Ultra-UHV anti-icing composite insulators.

AC Flashover Performance and Mechanism of Polluted and Iced IEC Standard Suspension Insulator String

Study on AC Flashover Process of Iced 110 kV Insulator Strings

Icing flashover characteristics and discharge process of 500 kV AC transmission line suspension insulator strings

Icing Flashover Characteristics of EHV AC Transmission Line Insulator Strings

Analysis of the Flashover Process on Ice-covered Insulator String

Flashover Performance of Pre-contaminated and Ice-covered Composite Insulators to be Used in 1000 kV UHV AC Transmission Lines

Experimental Study on the Flashover Characteristics of 500 Kv AC Ice-covered Insulator String under Different Arrangement

AC Electric Characteristics of the Ice-covered 110 Kv Glass Insulator Strings

Study of the effect of ice adhesion on electrical power transmission insulator

Wet Snow Flashover Characteristics of 500-Kv AC Insulator Strings with Different Arrangements

Feature extraction and classification of surface discharges on an ice-covered insulator string during AC flashover using gray-level co-occurrence matrix

Study of the flashover process on ice-covered insulator string

Icing Flashover Characteristics of 500 Kv AC Post Insulators

Study on the Icing Flashover Characteristics of Porcelain Double Sheds Suspension Insulator String

Statistical analysis on the DC discharge path of ice-covered insulators under natural conditions

Flashover performance of UHV&EHV post insulators under icing conditions

The optimization of 750kV anti-ice-flashing composite insulator string

Icing Flashover Leakage Current of Long Insulator Strings in 500 Kv Transmission Line

Field and Laboratory Tests of Insulator Flashovers under Conditions of Light Ice Accumulation and Contamination

Influence of Hydrophobicity on Composite Insulator's Flashover Voltage Under Light Ice Accumulation Conditions

Wet snow flashover characteristics of the insulator strings in ' Λ ' Shape on 500 kV transmission lines