Abstract:Abstract Economically feasible approaches are needed for wastewater treatment. Electrocoagulation (EC) is an electrochemical treatment method that removes various pollutants from wastewater. It has grown in popularity over conventional treatment methods, especially in industrial wastewater, due to its high performance and the ability to remove toxic compounds. However, it is crucial to reduce the costs associated with EC for widespread implementation. It is also important to decrease nickel (Ni) concentrations in wastewater to prevent potential health and environmental problems. Therefore, this study investigates Ni removal from synthetic and real wastewater using electrocoagulation. Zinc, as a novel electrode, was used as the sacrificial anode. Several operating conditions were assessed, including current density, initial pH, electrolysis time, and spacing between electrodes. The maximum Ni removal efficiency, after 90 min, reached 99.9% at a current density of 10 mA/cm 2 when the pH was 9.2 and the gap distance was 4 cm. The Ni removal rate reached 94.4% and 94.9% at a 2- and 6-cm spacing, respectively, after 90 min. Anode morphology, kinetic modeling, electrical energy consumption, and cost analysis were also investigated. The type of corrosion was uniform, which is easily predicted compared to pitting corrosion. The comparison between chemical coagulation and electrocoagulation was also reported. Experimental results indicated that the maximum Ni removal rates reached 99.89% after 90 min. The optimum spacing between electrodes was 4 cm, and the optimum current density was 10 mA/cm 2 . Additionally, the kinetic data were best represented through the second-order Lagergren model. The results demonstrated that the electrocoagulation performance was better than that of chemical coagulation for Ni removal. The maximum electrical energy consumption was 23.79 KWh/m 3 for Ni removal.

Removal of Nickel from Spent Electroless Nickel-Plating Bath with Nickel Foam Cathode

A Comparative Study Of Nickel(Ii) Removal From Electroplating Wastewater By Pre-Precipitation Combined With Fenton-Precipitation Or Fenton-Like-Precipitation

Removal of low concentrations of nickel ions in electroplating wastewater by combination of electrodialysis and electrodeposition

Experimental study on the treatment of highly concentrated electroplating nickel-containing waste liquid by electrolytic method

Recovery of nickel from electroless nickel plating wastewater based on the synergy of electrocatalytic oxidation and electrodeposition technology

Removal of Low-Concentration Nickel in Electroplating Wastewater Via Incomplete Decomplexation by Ozonation and Subsequent Resin Adsorption

Recovery of Nickel by Electrolytic Method from Electroplating Wastewater

Electrochemical reactor with rotating cylinder electrode for optimum electrochemical recovery of nickel from plating rinsing effluents

Nickel removal from wastewater using electrocoagulation process with zinc electrodes under various operating conditions: performance investigation, mechanism exploration, and cost analysis

Micro-electrolysis Treatment of Simulated Electroplating Wastewater Containing Nickel Ions

Treatment of Electroplating Wastewater Containing Nickel by Fenton Oxidation-Ferrite Process

Removal of nickel from chemical plating waste solution through precipitation and production of microsized nickel hydroxide particles

Nickel (II) removal from real electroplating wastewater in an electrocoagulation reactor: parametric optimization by response surface methodology

Recovery of Ni(II) from Real Electroplating Wastewater Using Fixed-Bed Resin Adsorption and Subsequent Electrodeposition

Approaches to Enhancing Cathodic Nickel Recovery from Ni-EDTA Containing Synthetic Wastewaters

Electrochemical removal of zinc and nickel ions from wastewater using porous electrodes

Electrochemical Characteristics of Nickel Hydroxide Fabricated from a Spent Electroless Plating Bath

Removal of Low Concentrations of Nickel Ions in Electroplating Wastewater Using Capacitive Deionization Technology.

Industrial-scale highly efficient nickel recovery from electroplating wastewater using resin adsorption followed by aeration mixing acid regeneration

Researches on the Recycling of Nickel from Spent Electroless Nickel Plating Baths by Hydrazine Reduction

Highly efficient nickel recovery from industrial wastewater via synergistic electrodeposition and electrocatalytic oxidation technique