Abstract:Titanium carbide powders were synthesized under an argon atmosphere using titanium dioxide and pyrolysis carbon derived from pyrolyzed phenolic resin as raw materials. The effects of synthesis temperature, holding time, and C/Ti molar ratio on the phase composition and morphology of the synthesized powders were investigated. The results show that the pyrolyzed phenolic resin at 1000 degrees C is a carbon source composed of amorphous and crystalline carbon. Increasing the C/Ti molar ratio of the mixed powder can reduce the content of titanium oxide impurity, indicating the improvement in the purity of TiC powder. In addition, the C/Ti molar ratio can also significantly affect the morphology of the synthesized TiC powders. SEM and EDS results exhibit that the atomic content on the surface of TiC particles is closely correlated with the atomic distribution on the surface of the particles. TiC powder with a median particle size of 384 nm could be synthesized at 1500 degrees C for 30 min at the C/ Ti molar ratio of 2.3:1. In addition, the sinterability of the synthesized TiC powder was preliminarily discussed. The hardness and fracture toughness of the TiC ceramic sintered at 2000 degrees C under 40 MPa with a dwell time of 2 h are 15.92 GPa and 3.22 MPam 1/2 , respectively.

A novel route for preparing Ti3AlC2 ceramics

Fabrication and properties of Ti3AlC2-based ceramics by two-step method

Fabrication and Properties of Ti<sub>3</sub>AlC<sub>2</sub>-Based Ceramics by Two-Step Method

Reactive Synthesis of Polycrystalline Ti3AlC2 and Its Sintering Behavior

A synthesis method of Ti3AlC2 ceramic

A novel simple method to stably synthesize Ti3AlC2 powder with high purity

Preparation and Properties of Ternary Ti3AlC2 and Its Composites from Ti–Al–C Powder Mixtures with Ceramic Particulates

Synthesis of High Purity Ti3AlC2 Bulk Material by Hot-Pressing

Preparation of Ti3AlC2 and Ti2AlC by self-propagating high-temperature synthesis and study on the reaction mechanism

A possible mechanism on synthesis of Ti3AlC2

Synthesis Of High-Purity Powder Ti3alc2 Materials By Pressureless Sintering

Preparation and characteristics of Ti3AlC2 -Al3Ti/Al composite materials synthesized from pure Al and Ti3AlC2 powders

In Situ Synthesis and Properties of Ti<sub>3</sub>AlC<sub>2</sub>/TiB<sub>2</sub> Composites

Large-scale fabrication of Ti3AlC2 powder with high-purity

Fabrication of Ti<sub>3</sub>AlC<sub>2</sub> Powder with High-Purity by Pressureless Sintering

Solid–liquid Reaction Synthesis of Layered Machinable Ti3AlC2 Ceramic

Combustion synthesis of ternary carbide Ti3AlC2 in Ti–Al–C system

Mechanical and Thermal Properties of Antiperovskite Ti3alc Prepared by an in Situ Reaction/Hot-Pressing Route

Preparation and Sinterability of Submicron Titanium Carbide Powders Synthesized with Phenolic Resin As Carbon Source by Carbothermal Reduction

Slip casting and pressureless sintering of Ti3AlC2