Abstract:A treasure map that separates different chemical bonding mechanisms is utilized to predict the miscibility of compounds. The solid solubility limit can be greatly improved by alloying compounds utilizing metavalent bonding. The increased solubility of Ag in SnTe by alloying with AgSbTe2 leads to a strong band alignment, ultralow lattice thermal conductivity, and exceptional maximum and average ZT values. SnTe is an emerging Pb‐free thermoelectric compound that has drawn significant attention for clean energy conversion. Chemical doping is routinely used to tailor its charge carrier concentration and electronic band structures. However, the efficacy of dopants is often limited by their small solubility. For example, only 0.5% Ag can be incorporated into the SnTe matrix. Yet, significantly more Ag (>7%) can be dissolved if SnTe is alloyed with AgSbTe2. This large enhancement of solubility can be understood from a chemical bonding perspective. Both SnTe and AgSbTe2 employ metavalent bonding as identified by an unusual bond‐rupture in atom probe tomography. Density functional theory calculations show that upon Ag doping the energy offset of the upmost two valence bands decreases significantly. This induces band alignment in SnTe, which results in an enhanced power factor over a broad temperature range. Moreover, the increased concentration of point defects and associated lattice strain lead to strong phonon scattering and softening, contributing to an extremely low κL of 0.30 Wm−1K−1. These synergistic effects contribute to a peak ZT of 1.8 at 873 K and a record‐high average ZT of ≈1.0 between 400 and 873 K in Sn0.87Mn0.08Sb0.08Te–5%AgSbTe2 alloy.

Thermoelectric Properties of Ag Doped Pseudo-binary Alloys (PbTe)1-x(SnTe)x

Influence of Ag2te Doping on the Thermoelectric Properties of P-Type Bi0.5sb1.5te3 Bulk Alloys

Influence of Ag_2Te Doping on the Thermoelectric Properties of p-type Bi_(0.5)Sb_(1.5)Te_3 Bulk Alloys

Thermoelectric properties of Na-doped PbTe0 .8-xSe0 .2 Sx alloys

Thermoelectric Properties of Quaternary Ag-Bi-Sb-Te Alloys

The Design and Properties of Pseudobinary Alloys (pbte)1−x–(snte)x with Gradient Composition

Band convergence and nanostructure modulations lead to high thermoelectric performance in SnPb0.04Te-y% AgSbTe2

Mechanical and transport properties of pseudo-binary alloys (PbTe) 1-x-(SnTe)x by pressureless sintering

Doping Effect on Thermoelectric Properties of Nonstoichiometric AgSbTe 2 Compounds

First-principles Calculations to Investigate Probing the Influence of Mn and Mg Doping Concentration on Electronic Structures and Transport Properties of SnTe Alloys

Thermoelectric performance of (AgBiTe2)1-x(SnTe)x with stable cubic enabled by enhanced configurational entropy

Regulation of exciton for high thermoelectric performance in (Bi, Sb)2Te3 alloys via doping with Pb and multi-scale microstructure

Interplay between metavalent bonds and dopant orbitals enables the design of SnTe thermoelectrics

Modulating the Valence of Ga and the Deep Level Impurity for High Thermoelectric Performance of N-Type Pb0.98Ga0.02Te1-xSex Compounds

Thermoelectric Properties of Non-Stoichiometric Agsbte2 Based Alloys with A Small Amount of Gete Addition

Thermoelectric properties of (GeTe)1-x[(Ag2Te)0.4(Sb2Te3)0.6]x alloys

Improved Solubility in Metavalently Bonded Solid Leads to Band Alignment, Ultralow Thermal Conductivity, and High Thermoelectric Performance in SnTe

Modulating the valence of In on the thermoelectric properties of Pb0.99In0.01Te1-xSx compounds

Approaching the Minimum Lattice Thermal Conductivity of P-Type SnTe Thermoelectric Materials by Sb and Mg Alloying.

A Combinatorial Approach to Microstructure and Thermopower of Bulk Thermoelectric Materials: the Pseudo-Ternary PbTe–Ag2Te–Sb2Te3 System

Microstructure and Thermoelectric Properties of Cubic AgPb18Sb1−xTe20 (x = 0.1, 0.3, 0.5) Compounds