Abstract:Structural and optical properties of the InGaAlAs-based multiple quantum well (MQW) 1.3μm laser structures produced on InP (001) substrates by metal organic vapor phase epitaxy (MOVPE) technique in the regime of selective area growth (SAG) have been studied. An x-ray beam of 10μm diameter generated by a microbeam high-resolution x-ray diffraction (μ-HRXRD) setup based on an imaging one-bounce capillary optic and a three-bounce channel cut Si(004) analyzer crystal has been utilized to measure the diffraction curves from MQW structures grown between oxide mask stripes. The high angular resolution achieved in our experiments allowed accurate measurements of θ–2θ scans over a broad range of angles that was necessary for utilization of fitting algorithms for quantitative analysis of the strain and thickness of individual layers in the MQW structures. The thickness and strain variations in the quantum well and the barrier layers of the MQW SAG structure have been analyzed as a function of the oxide mask width in the range of 15–140μm with the gap between the oxide masks in the range of 15–80μm. Dramatic structural changes from the perfect quality MQW’s in the SAG structures with the narrow oxide masks (less than 45μm) to the strain relaxed MQW’s in the SAG regime with the wide oxide masks (more than 50μm) have been experimentally detected. The spontaneous photoluminescence emission between 1.3 and 1.51μm from the simultaneously grown InGaAlAs-based MQW SAG laser structures have been measured. Using a combination of μ-HRXRD results with the microphotoluminescence data, the optimal SAG mask parameters for the growth of integrated InGaAlAs-based optoelectronic light-emitting components and devices have been determined.

1.55 Μm Wavelength InAsP/InGaAsP Multiple Quantum Well Laser Based Upon Solid Source Molecular Beam Epitaxy

1.55 Μm InAsP/InGaAsP Strained Multiple-Quantum-Well Laser Diodes Grown by Solid-Source Molecular Beam Epitaxy

All-Solid-Source Molecular Beam Epitaxy: Technology and Applications

Epitaxy and Physical Properties of 1.31μm Vertical Cavity Surface-Emitting Lasers

InxGa1-xSb/GaAs quantum well structures grown by molecular beam epitaxy

Difference of luminescent properties between strained InAsP/InP and strain-compensated InAsP/InGaAsP MQWs

quantum well structures grown by molecular beam epitaxy

InAsP/InGaAsP quantum-well 1.3 [micro sign]m vertical-cavity surface-emitting lasers

IaAsP/InGaAsP quantum-well 1.3 μm vertical-cavity surface-emitting lasers

1.48 Mu M Ingaas/Ingaasp Separated Confinement Strained Layer Multiple Quantum Well Lasers

Highly-Strained InGaAs/GaAs Single-Quantum-Well Lasers Grown by Molecular Beam Epitaxy

Molecular Beam Epitaxial Growth of IV–VI Multiple Quantum Well Structures on Si(111) and BaF2(111) and Optical Studies of Epilayer Heating

Temperature dependence of photoluminescence from as-grown and plasma-etched InAs0.45P0.55/In0.68Ga0.32As0.45P0.55 strained single quantum well

Threshold Characteristics of 1.55-Μm InGaAs/InGaAsP Strain-Compensated Quantum Well Lasers with Zero Net Strain

1.5 μm in GaAsP/InP strained MQW gain-coupled DFB laser with an improved periodically modulated injection-carrier grating

Microbeam high-resolution x-ray diffraction in strained InGaAlAs-based multiple quantum well laser structures grown selectively on masked InP substrates

GaAsBi Quantum Dots for 1.55 μm Laser Diode

Reliable InAs quantum dot lasers grown on patterned Si (001) substrate with embedded hollow structures assisted thermal stress relaxation

GaAs/AlGaAs quantum cascade lasers

High Temperature Characteristics Of 1.55 Mu M Ingaas/Ingaasp Strain-Compensated Multiple Quantum Well Lasers

Single Mode Operation of Short-Cavity Quantum Cascade Lasers