Abstract:This paper reviews results from research conducted at the University of Oklahoma on the development of new IV-VI semiconductor (lead salt) epitaxial growth and laser fabrication procedures that can ultimately lead to dramatic increases in mid-IR laser operating temperatures. Work has focused on growth of IV-VI semiconductor laser structures on silicon substrates using buffer layers that contain BaF2. Recent experiments show that it is possible to obtain high crystalline quality IV-VI semiconductor layer structures on (111)-oriented silicon substrates using molecular beam epitaxy (MBE) or on (100)-oriented silicon using a combination of MBE and liquid phase epitaxy (LPE). Experimental data for IV-VI semiconductor layer structures grown on silicon substrates including crystalline quality information as determined by high resolution X-ray diffraction (HRXRD) measurements and absorption edge information as determined by Fourier transform infrared (FTIR) transmission measurements are presented. Results show that these materials can be used to fabricate lasers that cover the 3 microns (3333 cm-1) to 16 microns (625 cm-1) spectral range. Removal of IV-VI semiconductor laser structures from the silicon growth substrate by dissolving BaF2 buffer layers with water is also demonstrated. This allows epitaxially-grown laser structures to be sandwiched between two heat sinks with a minimum of thermally resistive IV-VI semiconductor material. Theoretical modeling predicts that IV-VI lasers fabricated this way will have maximum continuous wave (cw) operating temperatures at least 60 degrees higher than those of IV-VI lasers fabricated on PbSe or PbTe substrates.

All-Solid-Source Molecular Beam Epitaxy: Technology and Applications

1.55 Μm InAsP/InGaAsP Strained Multiple-Quantum-Well Laser Diodes Grown by Solid-Source Molecular Beam Epitaxy

Controllable Growth of Aligned Monocrystalline CsPbBr3 Microwire Arrays for Piezoelectric‐Induced Dynamic Modulation of Single‐Mode Lasing

1.55 Μm Wavelength InAsP/InGaAsP Multiple Quantum Well Laser Based Upon Solid Source Molecular Beam Epitaxy

Epitaxy and Physical Properties of 1.31μm Vertical Cavity Surface-Emitting Lasers

InxGa1-xSb/GaAs quantum well structures grown by molecular beam epitaxy

quantum well structures grown by molecular beam epitaxy

Solid-Source Molecular Beam Epitaxial Growth of InP and InGaAsP

Molecular Beam Epitaxial Growth of IV–VI Multiple Quantum Well Structures on Si(111) and BaF2(111) and Optical Studies of Epilayer Heating

GSMBE growth and characterizations of AlInP/InGaAsP strain-compensated multiple-layer heterostructures

Difference of luminescent properties between strained InAsP/InP and strain-compensated InAsP/InGaAsP MQWs

Molecular Beam Epitaxial Growth and Properties of Layered Semiconductor Structures for Advanced Photonic and Electronic Devices

Inp and Ingaasp Materials Grown by Solid-Source Molecular Beam Epitaxy

Growth of A Periodic Inp-Based Heteroepitaxial Structure for A Quantum Cascade Laser

Iv-Vi Semiconductor Growth on Silicon Substrates and New Mid-Infrared Laser Fabrication Methods

IaAsP/InGaAsP quantum-well 1.3 μm vertical-cavity surface-emitting lasers

Optically Pumped Mid-Infrared Light Emitter on Silicon

Reliable InAs quantum dot lasers grown on patterned Si (001) substrate with embedded hollow structures assisted thermal stress relaxation

InAsP/InGaAsP quantum-well 1.3 [micro sign]m vertical-cavity surface-emitting lasers

1.48 Mu M Ingaas/Ingaasp Separated Confinement Strained Layer Multiple Quantum Well Lasers

MBE grown GaAsBi/GaAs double quantum well separate confinement heterostructures