Abstract:Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, Ahead of Print. A simplified tire finite element model modeling and simulation method with high efficiency and accuracy is proposed to address the issues of poor efficiency and low accuracy in tire finite element simulation. Firstly, the detailed finite element model of the tire is established, and the viscoelastic material parameters are determined through theoretical analysis and simulation verification. Then, the Hyperelastic material parameters are obtained through cyclic Tensile testing, and finally, the static tire condition test verification is completed. Based on the established detailed finite element model of the tire, the influence of different rubber materials on the dynamic characteristics of the tire is studied. On this basis, simplified friction and structure models are proposed to complete the establishment of a simplified tire finite element model. The simulation results of lateral and longitudinal slip conditions are compared with experimental data by implanting a finite element friction model that considers slip velocity and contact pressure. Through simulation analysis, it was found that the tread compound has a significant impact on the dynamic characteristics of the tire, while other compounds have a relatively small impact. Simplifying the tire finite element model can significantly improve the efficiency of finite element simulation and reduce convergence issues. The comparison accuracy between the finite element model simulation results and experimental data is relatively high, with the average accuracy of longitudinal force, lateral force, and correction moment reaching 89%, 95%, and 81%, respectively. This verifies the correctness and effectiveness of the simplified tire finite element model modeling and simulation method. This method provides certain reference significance for improving the efficiency of tire finite element simulation and providing virtual matching between tires and the entire vehicle.

Finite element formulation of a steel reinforced rubber tire structure

Experimental Characterization and Finite Element Modeling the Deformation Behavior of Rubbers with Geometry Defects

NONLINEAR FE ANALYSIS FOR RUBBER COMPOSITE STRUCTURES

Application of Rebar Model in Finite Element Analysis of Tire

Research on simplified tire finite element modeling and simulation method

FINITE ELEMENT SIMULATION FOR STATIC LOAD TEST OF RADIAL TIRES

Study on the Design Method of Equal Strength Rim Based on Stress and Fatigue Analysis Using Finite Element Method

Mechanical properties of cord-rubber composites and tire finite element analysis

Finite Element Simulation of Radial Tire Building and Shaping Processes Using an Elasto-Viscoplastic Model

Finite Element Analysis of a Flexible Ferris Wheel

Application of Finite Element Method in Structure Analysis of Passenger Car Radial Tire

Modeling and Validation of a Passenger Car Tire Using Finite Element Analysis

3D-FE Simulations of Automobile Tires

Finite Element Analysis for Tread Wear of Radial Tire

Analysis of Extension Propagation Process of Interface Crack Between Belts of a Radial Tire Using a Finite Element Method

An embedded model of cord-reinforced rubber composites for aircraft tires

Finite Element Analysis and Experimental Investigation on Complex Steel Cord in Radial Tires

Finite Element Analysis for Steady-State Rolling of Radial Tire

Finite Element Modeling for Steel Cord Analysis in Radial Tires

A Finite Element Model for the Rolling Loss Prediction and Fracture Analysis of Radial Tires

On the Large Deformation Rubber-Like Materials: Constitutive Laws and Fem