Abstract:Journal of Composite Materials, Ahead of Print. One of the primary challenges faced by sandwich composites is facesheet-core debonding, which can be mitigated through various techniques such as z-pinning and stitching through the thickness. This study investigates the impact of stitching on the bending behavior of sandwich composites comprising E-glass composite facesheets and a polyurethane foam core, employing experimental, numerical, and analytical methods. Specimens were stitched at three stitch spacings of 0.5, 1, and 2 cm, with a stitch pitch of 0.8 cm and stitch seam angles of 0°, 90°, 0/90°, ±45°, 45°/90°, and ±60°. Analysis of facesheet bending stress, core shear stress, and bending rigidity of stitched specimens was conducted through three-point bending tests and compared with unstitched specimens. Results indicate that reducing stitch spacing, thereby increasing stitch density, improves bending strength, and the best bending behavior observed at ±45° stitch seam angles. Damage assessment revealed fractures and depression of the foam, wrinkles on the upper facesheet, and buckling failure of resin columns. Additionally, a theoretical model predicted bending rigidity, showing good agreement (4%–15%) with experimental data. Finite element analysis using the ABAQUS program validated the experimental results, suggesting numerical modeling as a viable method for predicting flexural properties of stitched foam core sandwich composites.

STUDY ON CONSTITUTIVE RELATIONSHIP OF STITCHED LAMINATES(II) --Analytical and Experimental Study on Stiffness of Stitched Laminates

Study on Stiffness of Stitched Laminates

Bi-axial tensile test method and analytical algorithm of elastic constants for the airship envelope fabric

Experimental study on mechanical behavior of glue laminated bamboo Ⅰ-joists

ANALYSIS ON COMPRESSION BUCKLING OF STITCHED ORTHOTROPIC LAMINATES INCLUDING ARBITRARY DELAMINATION

Numerical simulation and experiment validation of variable stiffness composite laminates with open holes under unidirectional tension

Response Characteristics of Elastic Parameters of Woven Fabrics in Stress Space and a Nonlinear Constitutive Analysis

Computational modelling of postbuckling behavior of composite T-stiffened panels with different bonding methods

Experimental and Numerical Analysis of Stitched Composite Laminates Subjected to Low-Velocity Edge-on Impact and Compression after Edge-on Impact

Effect of Stitches on the Permeability of Interbundle Channels in Stitched Fabrics

Numerical Analysis of Thermodynamic Behaviour of Through-Thickness Stitched Sandwich Laminate

Finite Element Analysis of Low-Velocity Impact Damage of Stitched Laminates

Effect of stitching angle on mechanical properties of stitched sandwich panels

Mechanical Responses and Damage Morphology of Laminated Fabrics with a Central Slit under Uniaxial Tension: A Comparison Between Analytical and Experimental Results

Delamination buckling of stitched laminates

Effects of stitching parameters on the flexural properties of stitched foam core sandwich composites

Investigation and prediction of laminate quality and interlaminar mechanical performance of the tufted sandwich composites with different core structures

Experimental Investigation of Interlaminar Fracture Toughness of CFRP Composites with Different Stitching Patterns

Study on Cure-Induced Residual Stresses and Spring-in Deformation of L-shaped Composite Laminates Using a Simplified Constitutive Model Considering Stress Relaxation

Experimental and numerical study of specific bending behavior of tufted multilayered reinforcements and effects of tufting density

Influence of Stitch Angle on the Flexural Response of Composite Structures