Abstract:The paper presented an experimental study on the effect of the resin reinforced core configuration and core thickness on in-plane compressive responses and failure behaviors of composite sandwich specimens. Two resin reinforced core machining configurations were designed with three core thickness along. In-plane compressive load, displacement, strains on both sides, and failure morphology were closely monitored during the loading process. Meanwhile, the theoretical method also was supplementary to forecast the failures of sandwich structures. It was found that the enhancement of grooved, perforated holes and contour cut (GPC) core was better than double-side grooved and perforated hole (DGP) core to improve the in-plane compressive capacity of sandwich specimens for all thick cores. The core fracture or skin/core debonding failure of sandwich specimens resulted in an instant drop of in-plane compressive load, and the global buckling led to a slower reduction. The failure mode changed from global buckling to skin/core debonding at both sides as the core thickness increased for the Plain core sandwich specimen; switched from global buckling to a combined failure of core fracture and skin/core debonding at both sides, and then to skin/core debonding at both sides for the DGP core sandwich specimen; the skin/core debonding at the shallow side occurred for all GPC core specimens. The slight buckling trace of strains before the peak load probably triggered the skin/core debonding of sandwich specimens. The theoretical method could well forecast failure loads and corresponding failure modes of sandwich specimens with the 15 mm thick core, and reasonably predict failure loads for sandwich specimens with 30 mm and 45 mm thick cores.

Investigation and prediction of laminate quality and interlaminar mechanical performance of the tufted sandwich composites with different core structures

Investigation on the Compressive Mechanical Properties of Ultra-Thick CFRP Laminates

Influence of Fiber Cutting at the Composite Grid Intersection on the Compressive Performance of Laminate

Effect of Core Architecture on Charpy Impact and Compression Properties of Tufted Sandwich Structural Composites

Evaluation of the mechanical behaviour of tufted preforms

Investigation of the Interlaminar Shear Performance of Tufted Preforms and Composites under Mode II Loading Condition

Experimental and numerical research on flexural behavior of fiber metal laminate sandwich composite structures with 3D woven hollow integrated core

Experimental and numerical study of specific bending behavior of tufted multilayered reinforcements and effects of tufting density

Experimental Investigation of 3d Sandwich Structure with Core Reinforced by Composite Columns

Fabrication and braiding angle effect on the improved interlaminar shear performances of 3D braided sandwich hybrid composites

Exploring deformability in 3D tufted composite reinforcements: Understanding bending behaviors in forming applications

In-plane compressive responses and failure behaviors of composite sandwich plates with resin reinforced foam core

The Effects of Core Machining Configurations on the Mechanical Properties of Cores and Sandwich Structures

Mechanical Properties of Sandwiched Construction with Composite and Hybrid Core Structure

Mechanical properties and damage failure of 3D‐printed continuous carbon fiber‐reinforced composite honeycomb sandwich structures with fiber‐interleaved core

Structural analysis and strength-to-weight optimization of wood-based sandwich composite with honeycomb core under three-point flexural test

Layout design and mechanical behavior of 3D printed intralayer hybrid continuous carbon/glass fiber composites

A Comparative Study on Interlaminar Properties of L-shaped Two-Dimensional (2D) and Three-Dimensional (3D) Woven Composites

Study on in-plane compression properties and numerical modeling of three dimensional five-directional braided composites

Dynamic cushion, quasi-static stab resistance, and acoustic absorption analyses of flexible multifunctional inter-/intra-bonded sandwich-structured composites

Experimental and Numerical Analysis of Nonlinear Flexural Behaviour of Lattice-Web Reinforced Foam Core Composite Sandwich Panels