Abstract:Laminated plates are often modeled with infinite dimensions in terms of the so-called Whitney–Nuismer (WN) stress criteria, which form a theoretical basis for predicting the residual properties of open-hole structures. Based upon the WN stress criteria, this study derived a new formulation involving finite width; the effects of notch shape and size on the applicability of new formulae and the tensile properties of carbon-fiber-reinforced plastic (CFRP) laminates were investigated via experimental and theoretical analyses. The specimens were prepared by using laminates reinforced by plain woven carbon fiber fabrics and machined with or without an open circular hole or a straight notch. Standard tensile tests were performed and measured using the digital image correlation (DIC) technique, aiming to characterize the full-field surface strain. Continuum damage mechanics (CDMs)-based finite element models were developed to predict the stress concentration factors and failure processes of notched specimens. The characteristic distances in the stress criterion models were calibrated using the experimental results of un-notched and notched specimens, such that the failure of carbon fiber laminates with or without straight notches could be analytically predicted. The experimental results demonstrated well the effectiveness of the present formulations. The new formula provides an effective approach to implementing a finite-width stress criterion for evaluating the tensile properties of notched fiber-reinforced laminates. In addition, the notch size has a great effect on strength prediction while the fiber direction has a great influence on the fracture mode.

Study on Stiffness of Stitched Laminates

STUDY ON CONSTITUTIVE RELATIONSHIP OF STITCHED LAMINATES(II) --Analytical and Experimental Study on Stiffness of Stitched Laminates

ANALYSIS ON COMPRESSION BUCKLING OF STITCHED ORTHOTROPIC LAMINATES INCLUDING ARBITRARY DELAMINATION

Effect of Stitches on the Permeability of Interbundle Channels in Stitched Fabrics

Response Characteristics of Elastic Parameters of Woven Fabrics in Stress Space and a Nonlinear Constitutive Analysis

Delamination buckling of stitched laminates

Numerical simulation and experiment validation of variable stiffness composite laminates with open holes under unidirectional tension

Computational modelling of postbuckling behavior of composite T-stiffened panels with different bonding methods

Finite Element Analysis of Low-Velocity Impact Damage of Stitched Laminates

Effects of stitching parameters on the flexural properties of stitched foam core sandwich composites

Experimental and Numerical Analysis of Stitched Composite Laminates Subjected to Low-Velocity Edge-on Impact and Compression after Edge-on Impact

Numerical Analysis of Thermodynamic Behaviour of Through-Thickness Stitched Sandwich Laminate

Effect of stitching angle on mechanical properties of stitched sandwich panels

Mechanical Responses and Damage Morphology of Laminated Fabrics with a Central Slit under Uniaxial Tension: A Comparison Between Analytical and Experimental Results

FEM analysis of unit cell using single I-Fiber stitching process

A hybrid lamination model for simulation of woven fabric reinforced thermoplastic composites solid-state thermo-stamping

Response surface analysis of biaxial mechanical properties and elastic parameters for woven fabric composites

A New Stress-Based Formulation for Modeling Notched Fiber-Reinforced Laminates

Investigation and prediction of laminate quality and interlaminar mechanical performance of the tufted sandwich composites with different core structures

Toward the modelling of laminated veneer lumber stiffness and the influence of the number of plies

An Improved Model for Predicting Stiffness of Single-Lap Composites Bolted Joints Using Matlab/Simulink