Cyclic oxidation behavior of thermal barrier coatings on single crystal superalloys

张重远,李美姮,孙晓峰,宫声凯,管恒荣,胡壮麒

DOI: https://doi.org/10.3969/j.issn.1005-4537.2002.02.012

2002-01-01

Abstract:The thermal barrier coatings (TBC), which Ni30Cr12Al0.3Y bond coating was deposited by magnetron sputtering and ZrO2 ceramic top coating was deposited by electron beam-physical vapor deposition (EB-PVD), was produced on Ni-base superalloy. The bond coatings, which the mean grain size was less than 100 nm, were nanostructured coatings, and had good oxidation-resistance. The ceramic topcoats, which were columnar structure, permitted larger strain in the coatings. The as-deposited ceramic coatings consisted of large quantity nonequilibrium tetragonal (t′), a small amount cubic (c) and monoclinic (m) phases. The t′ phases, which had important role to the stabilization of zirconia at high temperature, can not directly transform into m phase during cooling. During cyclic oxidation at 1050°C, the scale of the cast alloy had spalled after two cycles. After 100 cycles, the surface scale of single-crystal superalloy was mainly composed of NiO,Cr2O3, a little Al2O3 and pores by the Kirkendall effect. However, the ceramic coatings, which had microcrack, have not spalled and the thermally grown oxide (TGO) was Al2O3. There were some microcrack between TGO and bond coating after 300 cycles.